Need help?Do you have a question about the Craftsman 21419 - 9 in. Band Saw and is the answer not in the manual?
Details the terms and conditions of the one-year full warranty for Craftsman professional tools.
Warns about chemicals in dust from construction activities that may cause cancer or reproductive harm.
Advises on proper apparel, safety glasses, and alertness for safe tool operation.
Emphasizes keeping the work area clean, well-lit, and free from hazards for safe operation.
Stresses the importance of regular maintenance and checking parts for safe tool operation.
Guides users on selecting the right tool and performing operations correctly for safety.
Instructions on how to securely mount the band saw to a stable work surface.
Steps for installing the table assembly onto the saw frame and ensuring it's perpendicular.
Details the specifications of the 120 Volt AC motor used in the band saw.
Describes the use and proper connection of a 3-prong to 2-prong grounding adapter.
Provides guidance for selecting the correct wire size (A.W.G.) for extension cords based on length.
Explains how to operate the ON/OFF switch and lock it for unauthorized use.
Provides instructions and warnings for safely removing the band saw blade.
Step-by-step guide on how to install a new band saw blade, including tensioning.
Instructions on how to properly track the blade using the tracking knob for optimal performance.
Explains the function of blade guides and how to adjust them for proper support and alignment.
Discusses factors like width, thickness, and pitch for choosing the correct blade for different materials and cuts.
Explains different cutting techniques like contour and beveled cutting.
Provides guidelines for keeping the machine and workshop clean, including cleaning wheels and mechanisms.
Information on lubricating shielded ball bearings and other moving parts.
Advice on maintaining the band saw in good working order, including cord and part replacement.
Identifies causes and corrective actions for frequent band saw blade breakage.
Addresses reasons for blades dulling quickly and how to prevent or fix it.
Explains why cuts may be crooked and how to achieve straight cuts.
Details causes and solutions for producing rough or uneven cuts.
Covers issues with blade twisting or wear on the sides and back.
Addresses the problem of blade teeth ripping off and its causes.
Explains potential reasons for the motor overheating and how to resolve them.
Provides troubleshooting steps for when the band saw fails to start.
To Next Page
General