To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 315.2145 and is the answer not in the manual?
General| Type | Circular Saw |
|---|---|
| Model Number | 315.2145 |
| No Load Speed | 5000 RPM |
| Bevel Capacity | 45 degrees |
| Blade Diameter | 7-1/4 inches |
| Depth of Cut at 45 degrees | 1-3/4 inch |
Explanation of safety alert symbols (Danger, Warning, Caution) and their meanings.
Recommendations for selecting and using extension cords with the band saw.
Procedures for proper grounding to ensure electrical safety.
Definitions of technical terms related to woodworking operations.
Key technical data and dimensions for the band saw.
Steps for carefully unpacking the saw and verifying all parts are present.
List of necessary tools for assembling and aligning the band saw.
Information on blade guides, their adjustment, and the tension adjustment knob.
How to use the table lock knob and angle adjustment knob for bevel cuts.
Details on operating the power switch and controlling the variable speed.
Guide for attaching the scale indicator and saw table to the saw frame.
Instructions for securely fixing the band saw to a stable work surface.
Methods for temporary or portable mounting using a board and clamps.
Procedure to adjust the blade guide assembly for proper blade support.
Steps for fitting and tensioning the saw blade correctly.
Detailed guide on setting the correct blade tension for optimal cutting.
How to adjust blade tracking and align the table square to the blade.
Procedure for adjusting thrust bearings and blade guide supports.
Instructions for controlling the saw's power and cutting speed.
Securing the saw and general guidelines for making various cuts.
Guidance on choosing the appropriate blade and speed for different materials.
Routine cleaning, plastic care, and lubrication requirements.
Maintenance procedures for wheel tires, motor brushes, and drive belt.
A table listing common issues, their causes, and recommended solutions.
Component list and part numbers for Figure A diagram.
Component list and part numbers for Figure B diagram.
Component list and part numbers for Figure C diagram.
Component list and part numbers for Figure D diagram.
