To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 315.21449 and is the answer not in the manual?
General| Model Number | 315.21449 |
|---|---|
| Type | Circular Saw |
| Depth of Cut at 90 degrees | 2-7/16 inches |
| Depth of Cut at 45 degrees | 1-3/4 inches |
| Blade Diameter | 7-1/4 inches |
| Cord Length | 6 feet |
Details on using appropriate extension cords for power tools, including wire gauge and condition.
Explains power requirements (voltage, frequency) and connection for the band saw.
Covers the importance of grounding for safety and proper connection procedures.
Information on the blade, blade guides, and blade guide knob and lock lever.
Details on table lock, angle adjustment, scale, and the saw table itself.
Explains tension adjustment knob and tracking adjustment screw functions.
Covers sawdust exhaust, cover tabs, hex key holder, and power switch.
Steps to attach the scale indicator to the saw frame for bevel cutting adjustments.
Instructions for attaching the saw table to the angle bracket.
Guidance on securely attaching the band saw to a workbench for stability.
Alternative method for securing the band saw using clamps or a mounting board.
How to set blade guide assembly height relative to the workpiece for safety.
Steps for safely installing a new blade and initial adjustments.
Procedures for setting correct blade tension for optimal performance and safety.
How to align the blade to run centered on the wheels for proper cutting.
Steps to ensure the table is perpendicular to the blade for accurate cuts.
Detailed instructions for setting blade support components for blade alignment and longevity.
Overview of band saw capabilities, cutting techniques, and workpiece handling.
Cleaning, lubrication, and general care for the band saw.
Maintenance and replacement procedures for blade guides.
Instructions for cleaning the motor and handling power cord issues.
Maintenance and replacement of motor brushes.
Steps for replacing the drive belt on the band saw.
Information regarding the lubrication of bearings within the tool.
Guide to diagnosing and resolving common issues with the band saw operation.
