To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 315.212050 and is the answer not in the manual?
General| Type | Circular Saw |
|---|---|
| Motor Power | 15 Amp |
| Blade Diameter | 10 inch |
| Arbor Size | 5/8 inch |
| Power Source | Corded Electric |
| No-Load Speed | 5000 RPM |
| Dust Port | Yes |
| Bevel Capacity | 45 degrees |
Guidance on understanding the tool, hazards, safety setup, and personal protective gear.
Key practices for safe tool operation, maintenance, and hazard prevention.
Essential personal protective equipment and environmental safety measures for tool use.
Crucial steps for securing the saw and workpiece for safe cutting operations.
Specific rules regarding cutting methods, avoiding kickback, and maintaining safe hand positioning.
Warnings about blade contact, tool condition, and maintaining operator alertness.
Guidelines for work area lighting, tool handling, laser guide use, and instruction retention.
Defines safety and operational symbols to ensure proper and safe tool usage.
Clarifies signal words indicating hazard levels for user safety.
Provides guidance on servicing and critical safety warnings for tool operation.
Provides guidance on selecting and using appropriate extension cords for safe operation.
Instructions for securely mounting the miter saw to a workbench for stability.
Specific instructions for blade placement, alignment, and securing, with important cautions.
Instructions for installing and aligning the laser guide for precise cutting.
Procedure for ensuring the miter table is square to the fence for accurate 90-degree cuts.
Detailed steps for safely removing the old blade and installing a new one.
Guidance on how to use the laser line to accurately mark and position cuts on the workpiece.
Detailed steps for making compound miter cuts, emphasizing angle adjustments and test cuts.
A comprehensive chart providing compound angle settings for various numbers of sides and pitches.
