To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 315.212500 and is the answer not in the manual?
General| Model Number | 315.212500 |
|---|---|
| Type | Circular Saw |
| Blade Diameter | 7-1/4 inches |
| Motor | 13 Amp |
| No Load Speed | 5000 RPM |
| Cord Length | 6 feet |
| Arbor Size | 5/8 inch |
| Depth of Cut at 90 degrees | 2-7/16 inches |
| Depth of Cut at 45 degrees | 1-3/4 inches |
Essential rules like reading instructions, guarding against shock, and keeping guards in place.
Rules for workpiece security, blade path awareness, and avoiding freehand operations.
Warnings about power supply, polarized plugs, and avoiding operation under influence.
Step-by-step guide on how to safely install or replace the saw blade.
Continues blade installation and introduces general saw alignment checks.
Detailed steps and diagrams for ensuring the miter table is perpendicular to the fence.
Alignment process to make the saw blade perpendicular to the fence.
Steps to align the blade parallel with the miter table at various angles.
How to adjust the depth stop for controlling cut depth.
Warnings and best practices before starting any cutting operation.
Detailed steps for executing a straight crosscut on the workpiece.
Defines compound cuts and the interaction between miter and bevel angle adjustments.
Detailed process for setting miter and bevel angles for precise compound cuts.
Instructions for performing cuts with the blade angled relative to the miter table.
