To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 315.212300 and is the answer not in the manual?
Emphasizes reading the manual and wearing protective eyewear for safe operation.
Explains safety alert symbols (Danger, Warning, Caution, Note) and their meanings.
Describes the concept and benefits of double insulation in power tools for safety.
Advises on professional servicing and using original Craftsman replacement parts.
Instructions for unpacking the saw, checking parts, and initial setup procedures.
Details the location and meaning of labels on the miter saw for safety.
Lists all loose parts included with the compound miter saw, with illustrations.
Identifies tools needed for checking adjustments and installing the saw blade.
Details the saw's motor, blade, cutting capacities, and introductory information.
Explains operation of miter lock handle, trigger, and lock-off lever for safety.
Details positive stops, bevel lock knob, mounting holes, and electrical connection.
Step-by-step guide for installing the miter lock handle onto the control arm.
Detailed instructions for safely installing or changing the saw blade.
Instructions for properly installing the dust guide onto the upper blade guard.
Details on tightening the blade bolt and replacing covers after installation.
Information on factory adjustments and checks needed before initial use.
Step-by-step guide to align the miter table parallel with the saw fence.
Instructions for ensuring the saw blade is parallel to the fence.
Procedure to align the saw blade perpendicular to the miter table.
Details on adjusting saw arm travel and bevel pivot for smooth operation.
Instructions for adjusting the depth stop for precise cutting depth.
Procedure to cut a slot in the zero clearance throat plate for blade clearance.
Explains crosscutting techniques and applications for the miter saw.
Step-by-step guide for making straight crosscuts on the workpiece.
Instructions for setting up and performing bevel cuts on the saw.
Explains how compound miter cuts are made and their applications.
Details on adjusting miter and bevel angles for compound cuts.
Detailed guide for making compound cuts, including angle settings and test cuts.
Guidance on using supports for long workpieces to ensure stability and safety.
Provides a chart of miter and bevel settings for various compound cuts.
Technique for cutting crown molding by laying it flat on the miter table.
Guidelines for cutting warped material to avoid pinching the blade.
Proper methods for clamping wide workpieces, like 2x6 boards, for cutting.
Advice on cleaning plastic parts and avoiding harmful chemicals.
Information on the tool's lubrication, stating no further lubrication is required.
Guidelines for selecting and safely using extension cords with the saw.
Step-by-step instructions for checking and replacing worn brush assemblies.
General