To Next PageTo Next PageWhat to do if Craftsman Lawn Mower will not mulch grass?
If your Craftsman Lawn Mower is not mulching grass effectively, it could be due to a few reasons. Avoid mowing when the grass is wet; wait until it's drier. If the grass is excessively high, mow once at a higher cutting height, then mow again at the desired height, or reduce the cutting path width. A dull blade can also hinder mulching, so sharpen or replace it.
Why is my Craftsman 247.377051 engine overheating?
If your Craftsman Lawn Mower engine is overheating, check the engine oil level and fill the crankcase with the proper oil if it's low. Also, ensure that there is no restriction to air flow around the engine by cleaning the area around and on top of the engine.
Why does my Craftsman 247.377051 have excessive vibration?
If your Craftsman Lawn Mower is experiencing excessive vibration, the cutting blade might be loose or unbalanced; tighten the blade and adapter and balance the blade. Alternatively, the cutting blade could be bent, in which case you should replace it.
Why does my Craftsman 247.377051 idle poorly?
If your Craftsman Lawn Mower is idling poorly, reset the gap or replace the spark plug if it is fouled, faulty, or the gap is too wide.
Why Craftsman 247.377051 Lawn Mower engine overheats?
The Craftsman Lawn Mower engine may overheat if: - The engine oil level is low. Fill the crankcase with the proper oil. - The airflow is restricted. Clean the area around and on top of the engine.
General| Brand | Craftsman |
|---|---|
| Model | 247.377051 |
| Category | Lawn Mower |
| Language | English |
Read and follow all instructions and safety practices before operating the machine.
Information regarding chemicals known to the State of California to cause cancer and birth defects.
Guidelines for safely operating the mower on slopes, including maximum angle.
Safety precautions regarding children near the operating mower.
Safety precautions for handling gasoline and general service procedures.
Safety advice for maintenance, cleaning, and general servicing of the mower.
Warning against modifying the engine, which can cause unsafe speeds and injury.
Information on emission control systems and compliance with regulations.
Requirement for spark arrestors on engines used in certain land conditions.
Explanation and description of safety symbols used on the product and in the manual.
Instructions for opening the product's shipping carton and removing it.
Steps to safely remove the lawn mower unit from its packaging.
Detailed steps for assembling and attaching the mower's handle.
Instructions for assembling and attaching the grass catcher to the mower.
Steps to attach the side discharge cover for alternative grass clipping management.
Procedures for adjusting cutting height and handle pitch for operation.
Identification and function of key controls and components like Blade Control, Drive Control, and Recoil Starter.
Step-by-step instructions for starting the lawn mower engine.
Procedure for safely stopping the lawn mower engine.
Guidance on using the mower as a mulcher or with a grass catcher.
A schedule outlining recommended maintenance tasks and intervals for the mower.
General advice and safety rules for performing maintenance on the mower.
Lubrication points and frequency for mower components.
Lubrication instructions for the blade and drive controls.
Instructions for cleaning and maintaining the engine.
Procedures for cleaning the mower deck and general upkeep.
Procedures for sharpening, balancing, and replacing the mower blade.
Information regarding the mower's drive belt and its maintenance.
Instructions for preparing the engine for long-term storage.
Steps for cleaning and preparing the mower for storage.
Care instructions for the mower's battery during storage.
