To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 247.888550 and is the answer not in the manual?
General| Engine Type | 4-cycle OHV |
|---|---|
| Engine Displacement | 208cc |
| Clearing Width | 24 inches |
| Intake Height | 21 inches |
| Drive System | Self-propelled |
| Speed Settings | 6 forward, 2 reverse |
| Stages | Two-stage |
| Auger Type | Steel |
| Start Type | Electric start |
| Throw Distance | 40 feet |
Read and understand the manual before operating.
Inspect the area and prepare for safe operation.
Follow safety rules and operating instructions for use.
Steps to safely remove the snow thrower from its packaging.
Identification of parts shipped separately.
Advice for easier and correct assembly procedures.
List of tools needed for assembly.
Instructions for connecting the handles to the main unit.
Steps to install the snow discharge chute.
Instructions for connecting the chute rotation mechanism.
How to connect the auger and traction drive control cables.
Instructions for connecting the gear shift mechanism.
Steps to connect the steering control triggers.
Instructions for connecting the snow thrower's lamp.
How to properly adjust the auger engagement mechanism.
How to properly adjust the track drive engagement.
How to adjust skid shoes for different snow conditions.
Familiarize yourself with controls and adjustments before use.
Explains the function of each control lever and trigger.
Procedures for safely stopping the snow thrower and engine.
How to engage the auger mechanism for snow throwing.
Steps for clearing snow, including chute direction and speed selection.
Advice for efficient snow removal and equipment care.
Procedures for preparing the engine and snow thrower before stopping.
Instructions for safely adding fuel to the snow thrower.
Steps for starting the engine via electric or recoil starter.
Specific procedures for starting the engine in cold weather.
Procedure for restarting a warm engine.
Steps to take if the recoil starter mechanism is frozen.
How to engage drive and augers to begin snow removal.
Safety rules and general maintenance advice.
Owner's duties for proper maintenance.
Schedule for routine maintenance tasks.
Points and procedures for lubricating snow thrower components.
Instructions for inspecting drive belts for wear.
Instructions for inspecting the friction wheel.
Proper oil types and viscosity for the engine.
Steps to check and fill the engine oil.
Procedure for changing the engine oil.
Maintenance and replacement of the spark plug.
Adjusting the traction drive control for proper function.
Checking and replacing auger shear bolts.
Adjusting the auger clutch mechanism.
Adjusting the chute for snow throw distance.
Adjusting the skid shoes for ground clearance.
Adjusting the shift rod for proper gear engagement.
Removal and replacement of auger drive belts.
Periodic checks and replacement of wear parts.
Procedures for removing and replacing drive belts.
Inspecting and replacing the friction wheel rubber.
Steps to prepare the engine for storage.
Steps to prepare the entire unit for storage.
Identification of warning and control labels on the unit.
