Craftsman 25912 - Drive Belt Replacement (General)

6
O Replacement of drive belt
1, Dismantle the cutting unit as descdbed previously.
2. Pullapart the contact for the cable to the electrical connec
tion (1).
3. Dismantle the motion restrainer for the clutch (2).
4, Engage the parking brake and work off the belt upwards
from the pulley (3), the clutch pulley (4).
5. Push the belt up between two fan blades and rotate the fan
clockwise until the belt comes loose (5).
6. Take off the belt from the engine pulley.
75