To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 26462 and is the answer not in the manual?
General| Model Number | 26462 |
|---|---|
| Type | Circular Saw |
| Voltage | 120V |
| Blade Diameter | 7-1/4 inches |
| Cord Length | 6 ft |
| Depth of Cut at 90 degrees | 2-7/16 inch |
| Depth of Cut at 45 degrees | 1-3/4 inches |
Explains safety symbols and terms used in the manual.
Provides essential safety rules for operating power tools.
Lists safety precautions specific to using the router table.
Lists optional accessories available for the router table.
Instructions for unpacking and verifying all parts of the router table.
Lists the tools needed for assembling the router table.
Step-by-step guide to assemble the main router table structure.
Instructions for attaching the router to the table.
Steps to assemble the router table fence and its components.
Guide for attaching the assembled fence to the router table.
Instructions for attaching the overhead guard to the fence.
Steps to assemble the push block accessory.
Instructions for assembling the miter gauge.
How to connect a dust collector to the fence port.
Guide for securely mounting the router table to a workbench.
How to select and install tabletop inserts for different router bits.
Overview of the power switch box and its function.
Details on grounding, cords, and outlets for safe operation.
Explains the features and operation of the switch box.
How to operate the router and switch box together.
Aligning the unitized fence to the miter bar slot for accurate routing.
Steps to adjust the router bit's depth and height for precise cuts.
Techniques for routing with the fence, including jointing operations.
How to perform edge cutting using router bits without a pilot bearing.
How to perform edge cutting using router bits with a pilot bearing.
Instructions for making specialized cuts like grooves, flutes, and veins.
How to perform end cutting using the fence and push block safely.
Detailed procedure for cutting tenons using the router table and push block.
How to use the miter gauge for cross-grain routing and mitering.
