To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 315.268350 and is the answer not in the manual?
General| Brand | Craftsman |
|---|---|
| Model | 315.268350 |
| Category | Power Tool |
| Language | English |
Covers essential precautions like reading the manual, keeping area clean, and avoiding hazards.
Mandatory use of safety glasses, apparel, and hearing/lung protection for operator safety.
Procedures for safe cord use, securing work, tool care, and proper disconnection.
Covers avoiding accidental starting, cord conditions, clean cutters, and hazardous environments.
Addresses drug/alcohol influence, proper servicing parts, and electrical conditions.
Guidelines for router table use and awareness of hazardous dusts.
Crucial warning about wearing safety goggles to prevent eye injury.
Critical safety warning against connecting power during adjustments or assembly.
Essential safety step to unplug the router before working on cutters.
Caution about touching hot cutters and collets after use to prevent burns.
Warning against using undersized shanks due to potential for injury.
Procedures for adjusting and setting the depth of cut on the router.
Step-by-step guide to setting the desired depth of cut using the router's controls.
Reinforces unplugging the router before setting depth of cut for safety.
Information on adjusting router speed and torque using the selector.
Explanation of the selector for adjusting router speed and torque based on job conditions.
Safety warning about wearing safety goggles during router operation.
Safety warning to ensure the switch is off before connecting to power.
Importance of selecting the correct feed rate for cut quality and preventing motor strain.
Guidance on achieving proper feeding and selecting optimal speeds.
Guidance on finding the right feed rate for smooth cuts and avoiding issues.
Understanding force feeding and its negative effects on cut quality and tool.
Critical warning about maintaining a firm grip to prevent loss of control.
Safety caution against removing the router before the cutter stops.
Warning about making cuts in multiple passes if depth is too great for one pass.
Crucial warning to use only specified replacement parts for safety and product integrity.
Warning about chemicals that can damage plastic parts.
Reinforces wearing safety gear during operation or blowing dust.
Safety warning to unplug the router before performing brush replacement.
Warning to check and replace damaged extension cords immediately.
Safety warning to unplug the router before making adjustments.
Serious warning about the danger of replacing knob without the spring.
Warning against using non-compliant router tables that lack proper guarding.
Warning about using large bits for freehand routing and their use on router tables.
Warning against using subbase screws for mounting to a router table.
