To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 315.275062 and is the answer not in the manual?
General| Model Number | 315.275062 |
|---|---|
| Type | Circular Saw |
| Power Source | Corded Electric |
| Voltage | 120V |
| Blade Diameter | 7-1/4 inches |
| Max RPM | 5000 RPM |
| Depth of Cut at 45 degrees | 1-3/4 inches |
| Depth of Cut at 90 degrees | 2-7/16 inches |
Covers tool knowledge, work area, personal protection, and tool handling.
Mandates safety glasses, hearing protection, and appropriate apparel.
Details power supply needs and essential electrical safety precautions.
Emphasizes disconnecting power before adjustments or part changes.
Step-by-step guide for safely changing router bits using spindle lock.
Procedure for setting desired cutting depth using controls and the depth stop system.
Correct feed direction to manage kickback and proper feed rate selection.
How depth affects performance and recommendations for pass depth.
Managing tool thrust for control based on bit rotation and setup.
Part usage, chemical warnings, and fiberglass material considerations.
Steps for replacing worn motor brushes safely and correctly.
Procedure for fine-tuning the plunge lock actuator for consistent depth settings.
Steps to replace the depth control knob, ensuring proper spring installation.
