Craftsman 27711 User Manual

CRAFTSMAN°
27711
Instruction manual
Pteasereadtheseinstructionscare-
fullyand makesureyouundemtand
them beforeusingthismachine.
Anleitungshandbuch
Bitte lesen Sie diese Anleitungen sorg-
_lf_g dutch und vergewiseem Sie sich,
Sie diese verstehen, bevor Sie die
Maschine in Be_ieb nehmen.
Manuel d'instructions
Merci de life V_s attentivement le
manuel d'instruc_ons. Aseurez-vous
d'avoir tout compds avant d'utiliser ce
tmcteur.
Manual de las inetrucciones
Por favor lea cuidadosamente y com-
prenda estas intrucciones antes
de usar esta maquina.
Manuale di iatruzioni
Pdma di utilizzare la macchina leggete
queste istruzioni con attenzione ed ac-
certatevi di avede comprese bane.
Inetructieboekje
Lees daze inst]'uc_es aandachf_g en
zorg dat u ze begdjpt voordat u daze
machine gebruikt,

Craftsman 27711 Specifications

General

Drive Type	Self-Propelled
Deck Material	Steel
Starter Type	Recoil
Mulching Capability	Yes
Bagging Capability	Yes
Side Discharge Capability	Yes
Engine Type	Gas
Cutting Width	21 inches
Engine	Briggs & Stratton
Cutting Height	1.25 - 3.75 in.
Wheel Size	8 inches (front), 11 inches (rear)

Summary

Safety Rules

Operator Training and Precautions

Instructions on proper use and training for operators, including preparation and operation guidelines.

Maintenance and Storage Safety

Procedures for maintaining and storing the machine safely to prevent hazards.

Important Warnings and Symbols

Hazard Warnings

Assembly Instructions

Steering Wheel Assembly

Seat Installation Safety Notes

Battery Installation and Safety

Steps for installing the battery and crucial safety precautions.

Bagger Components Installation

Functional Description of Controls

Control Panel Overview

Identifies the location and function of all operator controls.

Before Starting Procedures

Fuel Tank Filling Instructions

Instructions for safely filling the fuel tank.

Pre-Operation Oil Level Check

Tractor Driving Operation

Starting the Tractor Engine

Steps for starting the tractor engine.

Ignition Key Operation After Start

Post-start engine procedures and throttle control.

Hydrostatic Transmission Cold Start

Transmission Purge Procedure

Steps to purge the transmission for proper operation.

General Driving Instructions

Cutting Tips for Best Results

Converting Mower Functions

Mower Function Adjustment

Adjusting for Cutting Functions

Slope Operation Warning

Engine Shut-off Procedures

Ignition Key Safety Warning

Warning against leaving the ignition key in the machine.

Maintenance Procedures

Safety Precautions Before Servicing

Safety precautions before performing any repair or maintenance.

General Maintenance and Cleaning

General Maintenance Guidelines

General guidelines for keeping the tractor in good running condition.

Safety Warning for Maintenance

Crucial safety step before any repair or maintenance.

Engine Servicing Procedures

Engine Maintenance Reference

Oil Drain Valve Operation

Maintenance Schedule

Blade Maintenance and Care

Blade Care Instructions

Instructions for proper installation and care of mower blades.

Blade Removal Procedure

Blade Removal Steps

Brake System and Adjustment

Brake Adjustment Safety Warning

Warning regarding lock nut tightening after brake adjustment.

Drive Belt Replacement

Drive Belt Replacement Steps

Cutting Unit Adjustment

General Cutting Unit Adjustment

Side-to-Side Cutting Unit Adjustment

Transaxle Lever Neutral Adjustment

Transaxle Lever Neutral Adjustment Procedure

Troubleshooting Common Issues

Engine Will Not Start

Common causes and solutions for engine not starting.

Starter Motor Issues

Troubleshooting for starter motor problems.

Engine Overheating Causes

Uneven Cutting Results Troubleshooting

Storage Procedures and Service Information

End of Season Storage Steps

Cleaning Safety Warning

Safety warning about using gasoline for cleaning.