To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 27717 and is the answer not in the manual?
General| Brand | Craftsman |
|---|---|
| Model | 27717 |
| Category | Lawn Mower |
| Language | English |
Information on operator training, familiarization with controls, and responsibilities.
Guidelines for safe operation, including slope use, speed, and operator position procedures.
Procedures for maintaining the machine, keeping it clean, and proper storage to prevent hazards.
Instructions for adjusting the cutting unit's front edge to be lower than the back edge for optimal cutting results.
How to adjust the cutting unit's height from side to side to ensure it is level or within specified tolerances.
Describes the function of the combined brake and clutch pedal, including engine disengagement.
Explains the gear shift lever positions and the procedure for changing gears safely.
How to engage and disengage the cutting unit drive, and the function of the lever.
Instructions for quickly raising and lowering the cutting unit for transport or clearing obstacles.
Explains the three positions of the ignition key: OFF, ON, and START, and the warning to remove the key.
Step-by-step instructions for engaging and releasing the parking brake.
How to use the choke control for cold and warm engine starting.
Instructions for safely filling the fuel tank with unleaded petrol, including warnings about flammability.
Guidelines for operating the tractor, including lowering the cutting unit, choosing speed, and releasing the brake/clutch pedal.
Critical warnings about operating the tractor on slopes, including maximum angle and risks of tipping or overturning.
Essential safety precautions to take before performing any maintenance, inspection, or repair on the engine or cutting unit.
Common reasons why the engine fails to start, including fuel issues, spark plug problems, and carburetor blockages.
Troubleshooting steps for when the starter motor does not turn the engine, checking battery, contacts, and fuses.
