EasyManua.ls Logo

Craftsman 277152 - Maintenance and Storage Safety

Craftsman 277152
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Reducethethrottiosettingduringenginerun-outand,if
theengineis providedwitha shut-offvalve,tum thefuel
offatthe conclusionofmowing.
IV. Maintenance and Storage
Keep all nuts, boltsand screws tight to be sure the equip
mant is in safe working condition.
Never store the equipment with patrol in the tank inside
a building where fumes may reach an open flame or
spark.
Allow the engine to cool before storing in any enclo-
sure.
To reduce the fire hazard, keep the engine, silencer, bat-
tery compartment and patrol storage area free of grass,
leaves, or excessive grease.
Check the grass catcher frequently for wear or dete-
rioration.
Replace worn or damaged parts for safety.
If the fuel tank has to be drained, this should be done
outdoors.
On multi-bladedmachines,take care as rotatingone
bladecancause otherbladesto rotate.
When machine isto be parked, stored or leftunattended,
lower the cuffing means unless a positive mechanical
lock is used.
WARNING: Always disconnect spark plug wire and
place wire where it cannot contact spark plug in
order to prevent accidental starting when setting
up, transporting, adjusting or making repairs.
4

Related product manuals