To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 315.108241 and is the answer not in the manual?
General| Model Number | 315.108241 |
|---|---|
| Type | Circular Saw |
| No Load Speed | 5000 RPM |
| Blade Diameter | 7-1/4 inches |
| Depth of Cut at 45 degrees | 1-3/4 inch |
Explains the safety concept of double insulation in power tools.
Emphasizes qualified service and original parts for double insulated tools.
Covers reading manual, preventing electrical shock, and maintaining guards.
Details protecting hearing, securing work, tool maintenance, and avoiding accidental starts.
Focuses on kickback causes, prevention, and general operational hazards.
Highlights features like bevel/depth adjustment, air flow, and lock-off switch.
Specifies the intended use, primarily for cutting wood products.
Details the power supply requirements (120V, 60Hz AC) for the circular saw.
Step-by-step instructions for safely attaching and detaching the saw blade.
Covers blade guard function, kickback causes, and prevention strategies.
Guides on adjusting blade depth and making bevel cuts.
Instructions on maintaining control, rip cuts, cross cuts, and pocket cuts.
Guidance on part replacement, cleaning plastic parts, and avoiding damaging solvents.
Recommendations for selecting and using extension cords with the tool.
Provides a key number, part number, description, and quantity for each component.
Instructs users on how to order replacement parts, including necessary information.
