Need help?Do you have a question about the Craftsman 351.218330 and is the answer not in the manual?
General| Model Number | 351.218330 |
|---|---|
| Type | Circular Saw |
| Blade Diameter | 7-1/4 inches |
| No Load Speed | 5000 RPM |
| Weight | 10.5 lbs |
| Cord Length | 6 ft |
| Bevel Capacity | 50 degrees |
| Depth of Cut at 90 degrees | 2-3/8 inches |
| Depth of Cut at 45 degrees | 1-3/4 inches |
| Motor Amps | 13 Amps |
Identifies all parts and hardware included in the package for assembly.
Attaches blade raise/lower and blade tilt handwheels to the saw cabinet.
Sets blade tilt, assembles mobile base panels and caster sets.
Secures caster sets to base and installs power cord hooks.
Connects base to cabinet and installs various storage brackets.
Attaches extension tables, installs the blade, and checks table alignment.
Assembles the front and rear guide rails for the rip fence.
Installs switch, riving knife, and table insert.
Attaches blade guard, anti-kickback pawls, and installs the miter gauge.
Installs push stick, rip fence, and confirms final assembly.
To Next Page