To Next PageTo Next PageWhat to do if my Craftsman CONTRACTOR 351.21833 stops or will not start?
If your Craftsman Saw stops or doesn't start, here are a few things you can try: 1. Allow the motor to cool down, then reset it by pushing the reset switch. 2. Make sure all plug connections are secure. 3. Replace the fuse or reset the circuit breaker. 4. Replace the cord. 5. Replace the capacitor.
What to do if the material is kicked back from the blade of my Craftsman Saw?
If material is kicked back from the blade of your Craftsman Saw: 1. Align the rip fence with the miter slot. 2. Align the riving knife with the blade. 3. Always use the rip fence or miter gauge. 4. Install the riving knife. 5. Replace the blade. 6. Push the material completely past the blade before releasing it. 7. Replace or sharpen the anti-kickback fingers.
What to do if my Craftsman Saw blade stalls but the motor turns?
If the blade stalls on your Craftsman Saw while the motor is still running, try these steps: 1. Adjust the drive belt tension. 2. Replace the drive belts.
What to do if I cannot make a square cut when crosscutting with my Craftsman Saw?
If you cannot make a square cut when crosscutting with your Craftsman Saw, adjust the miter gauge.
Why does my Craftsman CONTRACTOR 351.21833 frequently open fuses or circuit breakers?
If your Craftsman Saw frequently blows fuses or trips circuit breakers: 1. Feed the workpiece into the blade more slowly. 2. Install fuses or circuit breakers of the correct size.
General| Type | Circular Saw |
|---|---|
| Motor | 15 Amp |
| Arbor Size | 5/8 inch |
| Dust Port | Yes |
| Weight | 11.5 lbs |
| No-Load Speed | 5, 000 RPM |
| Blade Diameter | 7-1/4 inch |
| Bevel Capacity | 45 degrees |
Details the one-year full warranty on the Craftsman tool, including repair arrangements and exclusions for expendable parts.
Covers essential safety practices before starting work, including proper attire, alertness, and maintaining a safe work area.
Outlines requirements for tool maintenance, proper tool usage, and keeping parts in working order for safe operation.
Provides guidance on ensuring saw stability, proper positioning, and avoiding hazards like kickbacks during operation.
Details necessary personal protective equipment and precautions for eyes, hands, face, body, and ears during operation.
Offers advice on using appropriate cutting tools and accessories for safe and efficient operation of the saw.
Guides on positioning the saw, installing handwheels, and removing initial packing materials for setup.
Details the process for assembling the mobile base panels and attaching caster sets to the base for mobility.
Instructions for attaching components like cord wrap hooks, base to cabinet, rip fence brackets, and storage brackets.
Covers attaching extension tables, installing the blade, checking table alignment, and assembling the rails.
Guides on installing the switch assembly, positioning the riving knife, and attaching the blade guard and anti-kickback pawls.
Instructions for installing the miter gauge, push stick, and rip fence, essential for guiding cuts.
Essential safety guidelines for proper grounding of the equipment to prevent electrical shock hazards.
Information and wiring diagrams for operating the saw on a 240-volt power supply.
Provides a general description of the saw's features and detailed technical specifications for performance.
Details the correct procedures for starting the saw motor, stopping it safely, and locking the switch.
Instructions on how to adjust the blade height and tilt angle, including setting positive stops.
Guides on adjusting the miter gauge and rip fence for accurate cutting operations and proper alignment.
Explains various cutting operations like crosscutting, ripping, bevel cutting, and provides safety tips for each.
Guidance on cleaning the saw's surfaces, including removing preservatives and cleaning rubber parts.
Details on lubricating bearings, gears, bushings, and other moving parts for optimal performance.
Instructions for changing the saw blade, ensuring proper blade selection, and general service recommendations.
