To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 21239 - 12 in. Sliding Compound Miter Saw and is the answer not in the manual?
General| Blade Size | 12 in. |
|---|---|
| Type | Sliding Compound Miter Saw |
| Motor Power | 15 Amp |
| Bevel Capacity | 45° |
| Weight | 45.4 lbs |
| Voltage | 120V |
| Arbor Size | 1 in. |
| Sliding Function | Yes |
| Dust Collection | Yes |
| Miter Capacity | 50° |
| No Load Speed | 3800 RPM |
| Bevel Range | 0° - 45° |
Details about the saw's power supply and motor.
Lists accessories recommended by the manufacturer for the miter saw.
Information on where to purchase recommended accessories for the power tool.
Defines common terms used in woodworking and with the miter saw.
Steps to attach the miter handle to the miter table.
Instructions for unlocking the slide carriage for transport or storage.
Details on storing the saw blade wrench.
Procedure for releasing the cutting head for adjustments or operation.
How to lock the cutting head for transport or storage.
Steps to attach the dust bag to the exhaust port.
Step-by-step guide for safely removing the saw blade.
Information on the Laser Trac® cutting guide and its operation.
How to adjust the saw's bevel angle to 90 degrees.
How to adjust the saw's bevel angle to 45 degrees.
How to adjust the saw for a 33.9-degree bevel cut.
How to adjust the bevel indicator pointer for the 90-degree setting.
How to set and adjust the miter angle of the saw.
Essential safety guidelines for operating the miter saw.
Pre-operation checks and preparations for safe use.
Procedures for inspecting the saw before each use.
Ensures guards are maintained for safe operation.
Guidance on choosing and using accessories for the saw.
Importance of maintaining a clean workspace for safety.
Instructions on how to start the miter saw safely.
How to adjust and remove the sliding fence.
Step-by-step instructions for replacing worn carbon brushes.
Information regarding the lower blade guard's function and maintenance.
How to manage sawdust accumulation for proper operation.
Guidance on lubricating specific parts of the saw.
Common motor problems and their solutions.
Solutions for common operational issues encountered with the saw.
List of parts for schematic A, including I.D., description, size, and quantity.
