To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 21237 - 10 in. Sliding Miter Saw and is the answer not in the manual?
Details about the saw's motor, including power source, speed, and insulation.
Specifications for the miter saw itself, such as cutting capacity and blade size.
Essential safety guidelines for operating any power tool, emphasizing common sense and vigilance.
Safety precautions specifically for operating a sliding compound miter saw.
Information on the saw's power requirements and motor type.
Explanation of the double insulation feature for enhanced electrical safety.
Guidelines to prevent motor damage from sawdust and improper use.
Recommendations for selecting and using extension cords safely and effectively.
Details on accessories compatible with the miter saw and potential hazards.
Guidance on ensuring the accuracy of a combination square for assembly.
Instructions for safely unpacking the miter saw and its components.
Diagram and labels identifying the various parts of the miter saw.
Definitions of common woodworking and saw-specific terminology.
Step-by-step guide for attaching the miter handle.
Procedure for loosening the slide carriage lock for movement.
Information on where to store the saw blade wrench.
Instructions for raising and lowering the cutting head, including locking mechanisms.
Guide for attaching the dust collection bag to the saw.
Instructions on how to turn the laser guide on and off for cutting alignment.
Procedures for adjusting the saw's bevel stops for accurate angles.
Steps to calibrate the bevel indicator to the 0° mark.
Method for setting and verifying the 45° bevel angle.
Procedure for setting the specific 33.9° bevel angle.
How to align the miter scale indicator to the 0° positive stop.
Steps to ensure the fence is square to the blade for accurate cuts.
Procedure for setting the maximum cutting depth of the saw head.
Key safety precautions to follow before and during saw operation.
Guidance on selecting and using appropriate accessories for the saw.
Importance of maintaining a clean workspace to prevent accidents.
Personal protective equipment and clothing recommendations for safe operation.
Checks to perform on the material before making a cut.
Guidance on maintaining balance and avoiding hazardous positions.
Proper techniques for initiating and completing a cut safely.
Fundamental steps for turning the saw on and off, including brake activation.
Instructions for moving the cutting head assembly for different cuts.
How to unlock, position, and lock the miter table for angled cuts.
Procedure to set the bevel detent pin for 33.9° crown molding cuts.
Steps for performing cuts that combine miter and bevel angles simultaneously.
Technique for cutting wide workpieces using the sliding carriage.
Proper method for cutting bowed workpieces safely against the fence.
How to use the stop plate for consistent repetitive cuts.
Instructions for attaching and using an auxiliary fence for small cut-off pieces.
Tips and setup for cutting base molding and other moldings.
Guidance on setting bevel and miter angles for crown molding cuts.
Procedure for replacing worn carbon brushes in the motor.
Instructions for maintaining and cleaning the lower blade guard.
Tips for clearing sawdust accumulation for smooth operation.
Guide to points requiring lubrication and the type of lubricant to use.
Solutions for common motor-related problems like not starting or stopping.
Solutions for operational issues like blade misalignment or binding.
General