To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 21194 - 7-1/4 in. Sliding Compound Miter Saw and is the answer not in the manual?
General| Blade Diameter | 7-1/4 in. |
|---|---|
| Type | Sliding Compound Miter Saw |
| Weight | 24.9 lbs |
| No Load Speed | 5, 000 RPM |
| Bevel Capacity | 45° |
| Bevel Range | Left 0° - 45°, Right 0° - 45° |
| Dust Collection | Dust bag |
Attaches the miter handle to the front of the miter table.
Connects the dust bag to the exhaust port.
Mounts the hold-down clamp assembly into the saw base.
Details storage for the blade wrench on the switch handle.
Step-by-step guide for installing a new saw blade.
Instructions on how to turn the laser guide on and off.
Procedure to set the cutting head to a 90-degree bevel angle.
Procedure to set the cutting head to a 45-degree bevel angle.
Ensures the fence is square to the saw blade for accurate cuts.
Procedure to set and adjust the maximum cutting depth of the saw.
Essential safety guidelines before starting saw operations.
Checklists for inspecting the saw before operation.
List of accessories recommended for use with the saw.
Steps for safely starting a cut with the saw.
Steps for safely completing a cut and handling the saw.
Guide for replacing worn carbon brushes in the motor.
Instructions for maintaining and checking the lower blade guard.
Identifies motor-related problems and their solutions.
