EasyManua.ls Logo

Craftsman 580.752181 - User Manual

Craftsman 580.752181
56 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
2200 PSI MAX
2.2 GPM MAX
PRESSURE WASHER
Operator’s Manual
Model No. 580.752181
Part No. 205597GS Draft - (02/19/2008)
• Safety
• Assembly
• Operation
• Maintenance
• Parts
• Español, p. 30
HOURS: Mon. - Fri. 8 a.m. to 5 p.m. (CT)
PRESSURE WASHER
CUSTOMER HELPLINE
1-800-222-3136
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
Visit our Craftsman website: www.craftsman.com
ADVERTENCIA
Antes de utilizar el producto, lea este
manual y siga todas las Reglas de
Seguridad e Instrucciones de Uso.
WARNING
Before using this product, read this
manual and follow all Safety Rules
and Operating Instructions.
This pressure washer is rated in accordance to the Pressure Washer Manufacture Association (PWMA) standard PW101 (Testing and Rating
Performance of Pressure Washers).
Esta limpiadora a presión está clasificada conforme a la norma PW101 (comprobación y clasificación de rendimiento de limpiadoras a
presión) de la Asociación de fabricantes de bombas a presión (Pressure Washer Manufacture Association, PWMA).

Questions and Answers

  • A
    Andrew CooleyAug 9, 2025
    Why Craftsman 580.752181 pump fails to produce pressure?
    • M
      Megan AdamsAug 9, 2025
      The pump might fail to produce pressure due to several reasons. It could be due to: * A low-pressure spray tip being installed - replace it with a high-pressure spray tip. * A blocked water inlet - clear the inlet. * Inadequate water supply - ensure adequate water flow. * A kinked or leaking inlet hose - straighten the hose or patch the leak. * A clogged inlet hose strainer - check and clean the strainer. * Water supply exceeding 100°F - provide a cooler water supply. * A blocked or leaking high-pressure hose - clear the blockage or replace the hose. * Gun leaks - replace the gun. * Obstructed spray tip - clean the spray tip. * Faulty pump - contact Sears service facility.
  • S
    Sara StewartAug 25, 2025
    What to do if Craftsman 580.752181 engine will not start or starts and runs rough?
    • P
      paulmartinezAug 25, 2025
      If your Craftsman Pressure Washer engine won't start or runs roughly, consider these possibilities: 1. The air cleaner is dirty - clean or replace it. 2. The fuel tank is empty - fill the fuel tank. 3. The fuel is stale - drain the tank and refill with fresh fuel. 4. The spark plug wire isn't connected - connect it to the spark plug. 5. The spark plug is bad - replace the spark plug. 6. There is water in the fuel - drain the tank and refill with fresh fuel. 7. The fuel mixture is excessively rich - contact Sears service facility.

Craftsman 580.752181 Specifications

General IconGeneral
Hose Length25 ft
Weight60 lbs
Engine Displacement (cc)190 cc
Engine Displacement190cc
Pump TypeAxial Cam
Soap ApplicatorYes
WheelsYes
Engine TypeOHV

Related product manuals