R
Robert BooneJul 28, 2025
What to do if my Craftsman 75118 Power Tool motor will not run?
- EElizabeth MartinezJul 28, 2025
If the Craftsman Power Tool motor isn't running, first, examine the fuse holder and replace any blown fuses. Ensure you're using a 15 amp fuse. Also, reset the circuit breaker if it has tripped. Avoid using a fuse or circuit breaker with a higher rating than specified for your circuit. Check for low voltage issues. Try disconnecting other appliances or use a dedicated branch circuit for the inflator. Inspect the extension cord.