Craftsman 944.364740 User Manual

16 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

586601527 02.20.14 BY Printed in U.S.A.

Model No.

944.364740

CAUTION:

Read and follow all

Safety Rules and In struc tions

before operating this equipment

Owner’s Manual

ROTARY LAWN MOWER

725 Series Briggs & Stratton Engine

Power-Propelled

22" Multi-Cut

Sears Canada, Inc., Toronto, Ontario M5B 2B8

Table of Contents

Questions and Answers:

A
antonio23Aug 2, 2025
How to fix a Craftsman 944.364740 that cuts unevenly?
- K
  Kimberly LindseyAug 2, 2025
  If your Craftsman Lawn Mower is providing a poor or uneven cut, it could be due to a worn, bent, or loose blade. Try replacing the blade and tightening the blade bolt. Another cause might be uneven wheel heights; ensure all wheels are set at the same height. Finally, a buildup of grass, leaves, and trash under the mower can also cause an uneven cut, so clean the underside of the mower housing.
C
Christina MasonAug 6, 2025
Why is my Craftsman 944.364740 Lawn Mower losing power?
- K
  Kevin LoveAug 6, 2025
  Loss of power in your Craftsman Lawn Mower can occur for several reasons. It might be due to the mower housing or blade dragging in heavy grass, which can be solved by raising the cutting height. It could also be caused by cutting too much grass, which also requires raising the cutting height. A dirty air filter, buildup of grass under the mower, too much oil in the engine, or walking too fast can also lead to power loss. Clean or replace the air filter, clean the mower's underside, check the oil level, and cut at a slower pace to resolve these issues.
K
Kevin CampbellAug 10, 2025
Why is my Craftsman Lawn Mower so hard to push?
- W
  William PierceAug 10, 2025
  If your Craftsman Lawn Mower is hard to push, it could be due to several factors. The grass might be too high, or the wheel height might be too low; in this case, raise the cutting height. Also, if the rear of the mower housing or cutting blade is dragging in the grass, raise the rear of the mower housing one setting higher. A full grass catcher will also make the mower harder to push, so empty it. Lastly, make sure the handle height is adjusted to suit you.
D
Dr. Rick MartinezAug 15, 2025
What to do if the starter rope on my Craftsman 944.364740 is hard to pull?
- A
  Amanda PalmerAug 15, 2025
  If your Craftsman Lawn Mower's starter rope is hard to pull, make sure the engine flywheel brake isn't engaged by ensuring the control bar is fully depressed against the upper handle before pulling. Other potential causes include a bent engine crankshaft (in this case, contact a qualified service center), a broken blade adapter (replace it), or the blade dragging in the grass (move the mower to cut grass or to a hard surface).
S
Stephen PetersonAug 19, 2025
Why is my Craftsman Lawn Mower vibrating so much?
- B
  Bruce ScottAug 19, 2025
  Excessive vibration in your Craftsman Lawn Mower can be attributed to a worn, bent, or loose blade; in this case, replace the blade and tighten the blade bolt. Another potential cause is a bent engine crankshaft, which requires contacting a qualified service center.
W
watsoncandaceAug 23, 2025
What to do if the grass catcher on my Craftsman 944.364740 is not filling?
- B
  Brandy WilliamsAug 23, 2025
  If the grass catcher on your Craftsman Lawn Mower isn't filling properly, it might be because the cutting height is too low; try raising it. Another reason could be that the lift on the blade is worn off, requiring a blade replacement. Additionally, the catcher might not be venting air properly, so clean the grass catcher.
J
jpetersonAug 27, 2025
Why is my Craftsman Lawn Mower losing drive or slowing down?
- S
  Steve SnowAug 27, 2025
  Loss of drive or slowing of drive speed in your Craftsman Lawn Mower could be due to belt wear (check/replace the drive belt), the belt being off the pulley (check/reinstall the drive belt), a worn or broken drive cable (replace the drive cable), or a loose drive control system (adjust the drive control).

Craftsman 944.364740 Specifications

General

Brand	Craftsman
Model	944.364740
Category	Lawn Mower
Engine Type	4-Cycle
Cutting Positions	6
Speed Settings	Variable
Mulching Capability	Yes
Bagging Capability	Yes
Side Discharge Capability	Yes
Type	Walk Behind
Power Source	Gas
Cutting Height	1.25-3.75 inches
Wheel Size	7 inch (front), 8 inch (rear)

Summary

CRAFTSMAN ROTARY LAWN MOWER

SAFETY RULES

CHILDREN SAFETY

Safety precautions for children around the lawn mower.

GENERAL OPERATION SAFETY

Guidelines for safe and proper operation of the mower.

SLOPE OPERATION SAFETY

Precautions for operating the mower on slopes to prevent accidents.

GASOLINE HANDLING SAFETY

Guidelines for safe handling and storage of gasoline for the mower.

GENERAL SERVICE SAFETY

General advice and warnings for mower maintenance and service.

WARRANTY AND SPECIFICATIONS

WARRANTY PERIODS AND EXCLUSIONS

Details on warranty duration, exclusions, and customer responsibilities.

PRODUCT SPECIFICATIONS

Key technical details and specifications for the lawn mower model.

ASSEMBLY AND PRE-OPERATION

REMOVING MOWER FROM CARTON

Step-by-step instructions for safely removing the lawn mower from its packaging.

SETTING UP AND UNFOLDING HANDLE

Procedures for unfolding, adjusting, and securing the mower's handle for use.

ASSEMBLE GRASS CATCHER

Instructions for attaching the grass catcher to the mower.

MOWER OPERATION

KNOW YOUR LAWN MOWER

Familiarization with the mower's controls, symbols, and safety features.

ADJUSTING CUTTING HEIGHT

Instructions on how to adjust the mower's cutting height for different lawn conditions.

OPERATING DRIVE SYSTEM

How to engage and disengage the mower's self-propelled drive system.

CONVERTING MOWER MODES

Steps for switching between mulching, side discharging, and rear bagging operations.

BEFORE STARTING ENGINE

ADD ENGINE OIL

Procedure for adding engine oil before the first use and during maintenance.

ADD GASOLINE

Instructions for safely filling the fuel tank with the correct type of gasoline.

STARTING AND STOPPING ENGINE

Procedures for starting and stopping the mower's engine safely.

MOWING TIPS AND TROUBLESHOOTING

GENERAL MOWING TIPS

Advice for effective mowing, including cutting height and ground speed.

MULCHING MOWING TIPS

Best practices for mulching grass clippings for optimal lawn health.

TROUBLESHOOTING COMMON PROBLEMS

Solutions for common issues like loss of power, uneven cut, and starting problems.

MAINTENANCE AND LUBRICATION

MAINTENANCE SCHEDULE

A schedule outlining required maintenance tasks based on usage hours or time intervals.

GENERAL MAINTENANCE RECOMMENDATIONS

Advice on maintaining the mower to ensure warranty validity and proper operation.

ENGINE LUBRICATION

Information on selecting and changing engine oil based on operating temperature.

BLADE CARE

TO REMOVE BLADE

Step-by-step instructions for safely removing the mower blade for maintenance or replacement.

TO REPLACE BLADE

Procedure for installing a new or sharpened mower blade correctly.

TO SHARPEN BLADE

Guidelines for sharpening the mower blade, emphasizing the importance of balancing.

STORAGE PROCEDURES

LAWN MOWER STORAGE

Instructions for preparing and storing the entire lawn mower unit for extended periods.

HANDLE STORAGE

How to fold and secure the mower's handle for storage or transportation.

SERVICE AND ADJUSTMENTS

CLEANING PROCEDURES

Procedures for cleaning the mower housing, engine parts, and drive cover for optimal performance.

ADJUSTING CUTTING HEIGHT

Instructions on how to adjust the mower's cutting height for different lawn conditions.

DRIVE BELT SERVICE

Steps to remove and replace the drive belt for maintenance or repair.

ADJUSTING THE HANDLE HEIGHT

How to adjust the mower's handle to one of three height positions for user comfort.

Related product manuals

Craftsman 944.364741

Craftsman 944.364781

Preview: Craftsman 944.364780

Craftsman 944.364780

Craftsman 944.364701

Craftsman 944.364720

Preview: Craftsman 944.364372

Craftsman 944.364372

Preview: Craftsman 944.364330

Craftsman 944.364330

Craftsman 944.364290

Craftsman 944.364150

Craftsman 944.364680

Craftsman 944.364151

Craftsman 944.364152