EasyManua.ls Logo

Craftsman 944.364741 - User Manual

Craftsman 944.364741
32 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Model No.
944.364741
CAUTION:
Read and follow all
Safety Rules and In struc tions
before operating this equipment
Owner’s Manual
ROTARY LAWN MOWER
725 Series Briggs & Stratton Engine
Power-Propelled
22" Multi-Cut
Sears Canada, Inc., Toronto, Ontario M5B 2B8

Table of Contents

Questions and Answers

  • A
    amberburchAug 17, 2025
    How to fix uneven cut with Craftsman Lawn Mower?
    • A
      Alyssa JacksonAug 17, 2025
      If your Craftsman Lawn Mower is leaving an uneven cut, here's what could be happening: * **Blade Condition**: A worn, bent, or loose blade can cause an uneven cut. Replace the blade and tighten the blade bolt. * **Wheel Height**: Uneven wheel heights will result in an uneven cut. Ensure all wheels are set at the same height. * **Debris Buildup**: Buildup of grass, leaves, and trash under the mower can interfere with the blade's performance. Clean the underside of the mower housing.
  • R
    Rachel CostaAug 20, 2025
    Why is the starter rope hard to pull on my Craftsman Lawn Mower?
    • B
      Brittany GutierrezAug 20, 2025
      If the starter rope on your Craftsman Lawn Mower is hard to pull, here are a few things to check: * **Control Bar**: Ensure the engine flywheel brake is disengaged by depressing the control bar to the upper handle before pulling the starter rope. * **Blade**: Check if the blade is dragging in the grass. If so, move the lawn mower to cut grass or to a hard surface. * **Blade Adapter**: A broken blade adapter can cause resistance. Replace the blade adapter. * **Engine Crankshaft**: If the engine crankshaft is bent, contact a Sears or other qualified service center.
  • S
    Shelly BaileyAug 25, 2025
    What to do if grass catcher is not filling on Craftsman 944.364741 Lawn Mower?
    • R
      richard84Aug 25, 2025
      If the grass catcher on your Craftsman Lawn Mower isn't filling properly, check these items: * **Cutting Height**: If the cutting height is too low, the grass may not be thrown effectively into the catcher. Raise the cutting height. * **Blade Condition**: If the lift on the blade is worn off, it won't generate enough airflow to fill the catcher. Replace the blade. * **Catcher Venting**: Ensure the catcher is venting air properly. Clean the grass catcher.
  • S
    Sherry JohnsonAug 27, 2025
    What causes loss of drive in Craftsman 944.364741?
    • C
      Christian WeissAug 27, 2025
      If your Craftsman Lawn Mower is experiencing a loss of drive, here are some things to inspect: * **Drive Belt**: Check the drive belt for wear or if it has come off the pulley. Replace the drive belt if worn, and reinstall if it's off the pulley. * **Drive Cable**: A worn or broken drive cable can cause loss of drive. Replace the drive cable. * **Drive Control System**: If the drive control system is loose, it may not be engaging properly. Adjust the drive control.
  • K
    Krystal GibsonAug 31, 2025
    Why Craftsman 944.364741 losing power?
    • S
      Sandra MaynardAug 31, 2025
      If your Craftsman Lawn Mower is experiencing a loss of power, consider these possible reasons: * **Grass Height**: The mower might be working too hard if the cutting height is too low, causing the housing or blade to drag. Raise the cutting height. * **Grass Buildup**: Accumulation of grass, leaves, and trash under the mower can impede performance. Clean the underside of the mower housing. * **Air Filter**: A dirty air filter restricts airflow, reducing power. Clean or replace the air filter. * **Oil Level**: Too much oil in the engine can also cause issues. Check the oil level. * **Walking Speed**: You may be walking too fast for the mower to effectively cut. Reduce your walking speed.
  • S
    Steven WashingtonSep 4, 2025
    Why is my Craftsman 944.364741 so hard to push?
    • E
      Erin SaundersSep 4, 2025
      If your Craftsman Lawn Mower is hard to push, consider the following: * **Grass and Wheel Height**: If the grass is too high or the wheel height is too low, it can make the mower difficult to push. Raise the cutting height. * **Mower Housing Drag**: If the rear of the lawn mower housing or cutting blade is dragging in the grass, it will increase resistance. Raise the rear of the lawn mower housing one setting higher. * **Grass Catcher**: A full grass catcher adds weight and makes the mower harder to push. Empty the grass catcher. * **Handle Height**: An improperly adjusted handle height can make pushing uncomfortable. Adjust the handle height to suit your preference.
  • E
    Emily HuntSep 7, 2025
    What causes excessive vibration in Craftsman 944.364741?
    • J
      jennifer87Sep 8, 2025
      Excessive vibration in your Craftsman Lawn Mower can stem from: * **Blade Issues**: A worn, bent, or loose blade can cause significant vibration. Replace the blade and tighten the blade bolt. * **Engine Crankshaft**: A bent engine crankshaft can also lead to excessive vibration. Contact a Sears or other qualified service center.
  • S
    Shannon RamirezNov 12, 2025
    Why my Craftsman 944.364741 Lawn Mower does not start?
    • J
      Joshua HannaNov 12, 2025
      If your Craftsman Lawn Mower doesn't start, several factors could be at play. Here's a breakdown of potential causes and solutions: * **Fuel Issues**: Check if the fuel tank is empty or if the fuel is stale or contaminated with water. Refill with fresh, clean gasoline if needed. * **Air Filter**: A dirty air filter can prevent the engine from starting. Clean or replace the air filter. * **Spark Plug**: Ensure the spark plug wire is connected and the spark plug is in good condition. Connect the wire or replace the spark plug if necessary. * **Blade Issues**: A loose or broken blade adapter can cause starting problems. Tighten the blade bolt or replace the blade adapter. * **Control Bar**: Make sure the control bar is depressed to the handle and is functioning correctly. Replace t...

Summary

SAFETY RULES

CHILD SAFETY PRECAUTIONS

Critical instructions to prevent injury or death to children.

GENERAL OPERATION SAFETY

Essential safety practices for operating the lawn mower.

CRAFTSMAN WARRANTY INFORMATION

WARRANTY COVERAGE AND TERMS

Details warranty period, repair/replacement policies, and exclusions.

CUSTOMER RESPONSIBILITIES FOR WARRANTY

Customer obligations required to maintain warranty validity.

PRODUCT SPECIFICATIONS

ASSEMBLY AND PRE-OPERATION

HANDLE SETUP AND GRASS CATCHER ASSEMBLY

Instructions for unfolding the handle and assembling the grass catcher.

STARTER ROPE AND ATTACHMENT INSTALLATION

Procedures for installing the starter rope and mower attachments.

LAWN MOWER OPERATION GUIDE

KNOWING MOWER CONTROLS AND SAFETY SYMBOLS

Familiarization with mower controls, adjustments, and safety symbols.

OPERATOR PRESENCE CONTROL SYSTEM EXPLAINED

Explanation of the safety feature that stops the engine when released.

OPERATING THE DRIVE SYSTEM

How to start, stop, and control the mower's self-propelled forward motion.

ADJUSTING THE CUTTING HEIGHT

Guide on setting the mower's cutting height for desired lawn appearance.

CONVERTING MOWER MODES

Steps to switch between mulching, bagging, or side-discharging modes.

SIDE DISCHARGING OPERATION SETUP

Instructions for setting up the mower for side discharge.

EMPTYING THE GRASS CATCHER

Proper procedure for removing and emptying grass clippings.

BEFORE STARTING THE ENGINE

ADDING ENGINE OIL

How to properly check and add oil to the engine before operation.

ADDING GASOLINE

Instructions for fueling the mower, including fuel type and safety.

MOWING TECHNIQUES AND TIPS

OPTIMIZING MULCHING PERFORMANCE

Tips for achieving the best results when mulching grass clippings.

MAINTENANCE SCHEDULE AND GUIDELINES

GENERAL MAINTENANCE RECOMMENDATIONS

Key advice for maintaining the mower and preserving warranty.

REGULAR CHECKS AND LUBRICATION

Essential checks before use and lubrication guidance.

LAWN MOWER BLADE CARE

BLADE REMOVAL AND REPLACEMENT

Step-by-step instructions for blade removal and installation.

BLADE SHARPENING AND BALANCING

Guidance on maintaining blade sharpness and balance for optimal performance.

ENGINE OIL AND LUBRICATION

SELECTING THE CORRECT ENGINE OIL

Information on choosing the right oil viscosity based on temperature.

PROCEDURE FOR CHANGING ENGINE OIL

Detailed steps for draining old oil and filling with new oil.

AIR FILTER AND SPARK PLUG MAINTENANCE

GENERAL CLEANING AND FILTER REPLACEMENT

SERVICE AND ADJUSTMENTS

ADJUSTING THE MOWER HANDLE HEIGHT

How to adjust the handle to a comfortable mowing position.

DRIVE BELT MAINTENANCE PROCEDURES

Instructions for removing and replacing the mower's drive belt.

STORAGE PROCEDURES

PREPARING THE MOWER FOR STORAGE

Steps for cleaning, lubricating, and protecting the mower for storage.

FOLDING THE HANDLE FOR STORAGE

Guide on how to safely fold the mower handle for compact storage.

ENGINE STORAGE PREPARATION

FUEL SYSTEM PREPARATION FOR STORAGE

How to prepare the fuel system to prevent gumming during storage.

CYLINDER AND OIL PREPARATION FOR STORAGE

Adding oil to the cylinder and other storage tips for the engine.

TROUBLESHOOTING ENGINE STARTING

TROUBLESHOOTING MOWER PERFORMANCE

REPAIR PARTS IDENTIFICATION

Craftsman 944.364741 Specifications

General IconGeneral
Cutting Width21 inches
Engine Type4-Cycle
Engine Displacement140cc
Cutting Height1.25-3.75 inches
Deck MaterialSteel
Starter TypeRecoil
Wheel Size7-inch (front)

Related product manuals