EasyManua.ls Logo

Craftsman 944.364280 - User Manual

Craftsman 944.364280
16 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
586567727 Rev. 1 06.27.14 BY Printed in U.S.A.
Model No.
944.364280
CAUTION:
Read and follow all
Safety Rules and In struc tions
before operating this equipment
Owner’s Manual
ROTARY LAWN MOWER
725 Series Briggs & Stratton Engine
Power-Propelled
22" Multi-Cut
Sears Canada, Inc., Toronto, Ontario M5B 2B8

Table of Contents

Questions and Answers

  • M
    marquezandrewAug 2, 2025
    How to fix a Craftsman 944.364280 Lawn Mower that leaves a poor, uneven cut?
    • C
      Carolyn JohnsonAug 2, 2025
      If your Craftsman Lawn Mower is providing a poor, uneven cut, it could be due to a worn, bent, or loose blade, so replace the blade and tighten the blade bolt. Another reason could be that the wheel heights are uneven, so set all wheels at the same height. Also, check for any buildup of grass, leaves, and trash under the mower, and clean the underside of the mower housing if necessary.
  • R
    Rebecca DixonAug 6, 2025
    What causes loss of drive speed in Craftsman Lawn Mower?
    • H
      hartjenniferAug 6, 2025
      If your Craftsman Lawn Mower is experiencing a loss of drive or slowing of drive speed, it could be due to belt wear, so check and replace the drive belt if needed. Also, check if the belt is off of the pulley, and if so, check and reinstall the drive belt. If the drive cable is worn or broken, replace it. Finally, a loose drive control system could be the cause, so adjust the drive control.
  • T
    Timothy DuncanAug 10, 2025
    Why is my Craftsman 944.364280 Lawn Mower losing power?
    • S
      Scott Martin DVMAug 10, 2025
      If your Craftsman Lawn Mower loses power, several factors could be the cause. Make sure that the rear of the lawn mower housing or cutting blade isn't dragging in heavy grass by raising the cutting height. Avoid cutting too much grass at once, also by raising the cutting height. A dirty air filter can also cause power loss, so clean or replace it. Buildup of grass, leaves, and trash under the mower can be another culprit, so clean the underside of the mower housing. Ensure that there isn't too much oil in the engine by checking the oil level, and avoid walking too fast by cutting at a slower walking speed.
  • Y
    Yvonne WarnerAug 15, 2025
    Why is my Craftsman 944.364280 so hard to push?
    • M
      megan31Aug 15, 2025
      If your Craftsman Lawn Mower is hard to push, it could be due to several reasons. If the grass is too high or the wheel height is too low, raise the cutting height. If the rear of the lawn mower housing or cutting blade is dragging in the grass, raise the rear of the lawn mower housing one setting higher. If the grass catcher is too full, empty it. Also, make sure the handle height position is right for you by adjusting the handle height to suit.
  • R
    Robert AvilaAug 19, 2025
    What to do if my Craftsman Lawn Mower has excessive vibration?
    • S
      Sheila StoneAug 19, 2025
      If you're experiencing excessive vibration with your Craftsman Lawn Mower, it could be due to a worn, bent, or loose blade. Replace the blade and tighten the blade bolt. If the engine crankshaft is bent, contact a Sears or other qualified service center.
  • M
    Michelle MayoAug 23, 2025
    Why is the grass catcher not filling on my Craftsman 944.364280 Lawn Mower?
    • D
      dawn94Aug 23, 2025
      If the grass catcher isn't filling properly on your Craftsman Lawn Mower, it might be because the cutting height is too low, so raise it. Another reason could be that the lift on the blade is worn off, in which case you should replace the blade. Lastly, the catcher might not be venting air properly, so clean the grass catcher.
  • S
    sharon47Aug 27, 2025
    Why is the starter rope hard to pull on my Craftsman 944.364280?
    • R
      richardrussellAug 27, 2025
      If the starter rope on your Craftsman Lawn Mower is hard to pull, it could be because the engine flywheel brake is on when the control bar is released. Depress the control bar to the upper handle before pulling the starter rope. If the engine crankshaft is bent, contact a Sears or other qualified service center. A broken blade adapter could also be the cause, so replace it. Finally, the blade might be dragging in the grass, so move the lawn mower to cut grass or to a hard surface.

Summary

SAFETY RULES

GENERAL OPERATION

Instructions for safe and proper operation of the lawn mower, including general precautions.

SLOPE OPERATION

Guidelines for operating the mower safely on slopes to prevent accidents.

SAFE GASOLINE HANDLING

Precautions for handling gasoline to prevent injury and property damage.

WARRANTY AND SPECIFICATIONS

WARRANTY EXCLUSIONS AND REPAIRS

Details specific conditions not covered and warranty period for repairs.

DISCLAIMERS AND CUSTOMER RESPONSIBILITIES

Legal disclaimers, customer rights, and obligations for warranty.

PRODUCT SPECIFICATIONS

Key technical details about the lawn mower, such as capacity and measurements.

ASSEMBLY AND INITIAL SETUP

UNFOLDING AND ADJUSTING THE HANDLE

Instructions on how to properly unfold and adjust the mower handle.

ASSEMBLING GRASS CATCHER AND STARTER ROPE

Steps for attaching the grass catcher and installing the starter rope.

INSTALLING OTHER ATTACHMENTS

Guidance on attaching accessories like the bagging blade.

OPERATION AND CONTROLS

MOWER OVERVIEW AND SAFETY SYMBOLS

Familiarization with mower parts, controls, and safety symbols.

ENGINE AND DRIVE SYSTEM OPERATION

Explanation of operator presence, starter, drive controls, and mulcher door.

CUTTING HEIGHT AND CONVERSION MODES

Instructions for adjusting cutting height and converting mower for bagging or discharging.

MOWER CONFIGURATION AND CONVERSION

SIDE DISCHARGING SETUP

Instructions for setting up the mower for side discharge operation.

EMPTYING THE GRASS CATCHER

Procedure for removing and emptying the grass catcher bag.

ENGINE PREPARATION AND STARTUP

ADDING ENGINE OIL AND GASOLINE

Steps for checking and adding the correct type and amount of oil and gasoline.

STARTING AND STOPPING THE ENGINE

Procedures for safely starting and stopping the lawn mower engine.

MOWING TECHNIQUES AND TROUBLESHOOTING

OPTIMAL MOWING AND MULCHING TIPS

Tips for effective mowing, including cutting height, speed, and mulching.

TROUBLESHOOTING COMMON ISSUES

Identification and solutions for common mower problems like loss of power or vibration.

MAINTENANCE SCHEDULE AND GUIDELINES

REGULAR MAINTENANCE SCHEDULE

A table outlining required maintenance tasks and their frequencies.

GENERAL UPKEEP RECOMMENDATIONS

Recommendations for proper upkeep and care of the lawn mower.

COMPONENT MAINTENANCE AND STORAGE PREP

TIRE, WHEEL, AND BLADE CARE

Instructions for maintaining tires, drive wheels, and blade care.

ENGINE STORAGE AND FUEL SYSTEM CARE

Steps for preparing the engine and fuel system for long-term storage.

STORAGE PROCEDURES AND LUBRICATION

LAWN MOWER AND HANDLE STORAGE

Steps for cleaning, folding the handle, and preparing the mower for storage.

ENGINE OIL AND LUBRICATION

Guidance on engine oil type, checking levels, and changing oil.

CLEANING AND ADJUSTMENTS

AIR FILTER, MUFFLER, AND FUEL FILTER MAINTENANCE

Maintenance procedures for key engine components like the air filter and fuel filter.

MOWER CLEANING AND ADJUSTING HEIGHT

Steps for cleaning the mower and adjusting cutting height.

DRIVE BELT AND HANDLE ADJUSTMENTS

Instructions for servicing the drive belt and adjusting the mower handle.

Craftsman 944.364280 Specifications

General IconGeneral
EngineBriggs & Stratton
Engine Type4-Cycle OHV
Engine Displacement190cc
Cutting Positions6
SpeedVariable
Oil Capacity20 oz
Warranty2-Year Limited
Discharge OptionsSide, Mulch, Rear Bag
Cutting Height1.25 - 3.75 inches
Drive SystemSelf-propelled

Related product manuals