Need help?Do you have a question about the Craftsman 944.364580 and is the answer not in the manual?
General| Engine | Briggs & Stratton |
|---|---|
| Drive System | Self-Propelled |
| Cutting Height Positions | 6 |
| Deck Material | Steel |
| Mulching Capability | Yes |
| Bagging Capability | Yes |
| Side Discharge Capability | Yes |
| Starter Type | Recoil |
| Cutting Width | 21 inches |
| Discharge Options | Side, Mulch |
| Cutting Height | 1.25 - 3.75 in. |
| Fuel Tank Capacity | 0.5 gallons |
Warranty on Power Mower (Gas) will be ninety (90) days from date of purchase if used for commercial or rental purposes.
This Warranty does NOT cover: • Pre-delivery set-up. • Expendable items which become worn during normal use.
Read, understand, and follow all instructions on the machine and in the manual(s) before starting.
Mow across the face of slopes: never up and down. Exercise extreme caution when changing direction on slopes.
Keep children out of the trimming area and under the watchful care of another responsible adult.
Covers fuel safety, repair practices, and safety device integrity.
Includes cleaning, blade/wheel care, and grass catcher checks.
Focuses on engine governor settings and speed warnings.
Step-by-step guide to unpack the lawn mower from its shipping carton.
Procedures for unfolding the handle and adjusting it for comfortable operation.
Steps to slide the bag, secure bindings, and close the door.
Guide to installing discharge chute or grass catcher for different modes.
Identifies and explains the function of key controls like the handle, levers, and adjusters.
Explains the meaning of various warning and operational symbols found on the mower.
Information on engine speed, zone control, and operator presence bar.
Explanation of how to use and adjust the self-propel drive control.
Procedure for setting the mower's cutting height using levers.
Instructions for converting to rear bagging operation.
Steps to attach the side discharge deflector.
Quick reference for converting between mulching, bagging, and discharging.
Steps for safely removing and emptying the grass catcher.
Procedures for checking and filling the engine oil and gasoline.
Procedures for safely starting and stopping the mower engine.
Advice for achieving optimal mulching performance.
Recommendations for efficient and effective mowing in various conditions.
A table detailing required maintenance actions at different intervals.
Recommendations, warranty notes, and essential checks before each use.
Guidelines for lubricating unit components and a lubrication chart.
Instructions for caring for tires, drive wheels, and gear case.
Procedures for removing, replacing, and sharpening the mower blade.
Guidance on checking grass catcher and note on engine maintenance.
Step-by-step guide for draining and refilling the engine oil.
Instructions for cleaning or replacing the air filter cartridge.
Information on inspecting muffler, replacing spark plug, and cleaning housing.
Safety warnings before performing any service or adjustments.
Instructions for cleaning the mower underside and drive cover.
Steps to remove the drive belt for maintenance or replacement.
Comprehensive guide for installing a new drive belt.
Instructions for setting the handle to a comfortable operating position.
Information about factory-set engine speed and non-adjustable carburetor.
Steps for cleaning, lubricating, and securing the mower for storage.
Instructions on how to fold the mower handle for compact storage.
Instructions to prevent fuel system issues during storage.
Steps to prepare the cylinder for long-term storage.
Advice on storing gasoline, unit location, and covering.
Solutions for problems like loss of power, uneven cut, and excessive vibration.
Troubleshooting for hard-to-pull starters, catcher filling, and pushing difficulty.
Addressing problems related to drive speed and belt performance.
Detailed breakdown and part numbers for the gear case assembly.
Parts list for the handle, grass bag, and related hardware.
Replacement parts for the mower housing, skirts, and discharge chute.
Replacement parts for the drive control levers, cables, and gears.
Parts list for wheel assemblies, axles, and retainers.
Diagrams for cylinder, piston, connecting rod, and oil pan.
Diagrams for crankshaft, control system, and flywheel assemblies.
Lists for cylinder, piston, connecting rod, and oil pan components.
Parts for crankshaft, control system, and flywheel assemblies.
Replacement parts for the muffler and air cleaner.
Diagrams for camshaft pulley and carburetor.
Diagrams for choke, fan cover, and recoil starter.
Parts lists for fan cover and choke components.
Lists for carburetor and recoil starter components.
Parts lists for camshaft pulley and engine labels.
To Next Page