To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 973.111471 and is the answer not in the manual?
General| Model Number | 973.111471 |
|---|---|
| Category | Drill |
| Type | Corded Drill |
| Voltage | 120 V |
| No Load Speed | 0-2500 rpm |
| Power Source | Corded Electric |
| Weight | 3.5 lbs |
| Chuck Size | 3/8 inch |
Covers keeping the work area clean, avoiding hazardous environments, and proper tool usage techniques.
Emphasizes wearing appropriate apparel, safety glasses, and hearing/lung protection during operation.
Addresses electrical shock prevention, securing work, not overreaching, and removing tools before use.
Provides specific safety rules for battery-powered tools and their chargers, including charging conditions.
Covers safe use of extension cords and precautions for recharging hot battery packs.
Identifies key features and components of the drill-driver, including the keyless chuck and bit storage.
Explains the purpose and proper use of the wrist strap to prevent dropping the tool.
Instructions on how to charge the battery pack, install it, and remove it from the drill.
Details on using the switch, variable speed, lock, reversing selector, and adjustable torque clutch.
Guidance on using the keyless chuck, installing/removing bits, and performing chuck removal.
Covers proper drilling methods, using the built-in level, and retightening a loose chuck.
Guidelines for servicing the tool, using identical parts, and avoiding damaging solvents.
Recommendations for storing, charging, and maintaining batteries to prolong their service life.
