To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 973.274960 and is the answer not in the manual?
General| Voltage | 120 V |
|---|---|
| Speed | 0-2500 rpm |
| Power Source | Corded Electric |
| Type | Drill |
| Chuck Size | 3/8 inch |
Details the warranty coverage and service for the drill-driver.
Lists key technical details such as chuck capacity, voltage, and speed.
Familiarize yourself with all operating features and safety requirements.
Reduces chances of dropping the drill-driver by providing a secure grip.
Instructions on how to charge the battery pack using the provided charger.
Details on operating the ON/OFF switch and controlling speed with trigger pressure.
Steps for correctly installing and removing the battery pack from the drill.
Information on locking the switch and changing the direction of rotation.
Guide on how to hand tighten or release drill bits in the keyless chuck.
Instructions for inserting and removing drill bits from the chuck jaws.
How to adjust the torque clutch for different screw sizes and materials.
Location and use of the bit storage area on the bottom of the drill.
Using the built-in level for accurate, straight drilling operations.
Techniques for starting holes, securing material, and managing drill bit performance.
Procedures for removing the chuck and retightening a loose chuck.
Tips for maximizing battery life, including storage, charging, and handling.
Explanation of the built-in overload protector and how to resume operation.
