To Next PageTo Next Page
Need help?Do you have a question about the Craftsman CMCD713 and is the answer not in the manual?
General| Type | Cordless Drill/Driver |
|---|---|
| Voltage | 20V |
| Chuck Size | 1/2 inch |
| Speed Settings | 2 |
| Maximum Speed (RPM) | 1500 RPM |
| Clutch Settings | 24 |
| Battery Type | Lithium-ion |
Ensures safe operation by maintaining a clean, well-lit, and hazard-free work environment.
Precautions for safe use of power tools, focusing on preventing electric shock.
Guidelines for operator awareness, protective equipment, and safe handling practices.
Crucial safety guidelines for handling, charging, and using battery packs to prevent hazards.
Guidelines for optimal storage of battery packs to ensure longevity and safety.
Proper methods for cleaning battery packs to maintain performance and safety.
Explanation of fuel gauge functionality and interpretation of battery charge indicators.
Safety precautions for transporting battery packs to prevent hazards like shorts or fires.
Information regarding battery recycling programs and the RBRC® seal.
Critical safety rules for using battery chargers to prevent electric shock, fire, and damage.
Functionality that suspends charging until the battery pack reaches an optimal temperature.
System protecting the battery pack against overloading, overheating, or deep discharge.
Key recommendations for optimal battery charging to ensure longevity and performance.
Step-by-step guide for securely inserting and removing drill bits and accessories.
Instructions for correctly attaching and detaching the battery pack from the tool.
Demonstrates the correct way to hold the tool for safe and effective operation.
Explanation of the trigger's speed control and the forward/reverse directional switch.
Information about the integrated worklight and its automatic shut-off feature.
General advice on preparing and executing tasks with the tool.
Guidance on using the clutch for adjustable torque in driving and removing fasteners.
Instructions and recommendations for drilling various materials, including masonry.
Procedures for cleaning the tool's air vents and exterior surfaces.
Information on recommended accessories and their safe usage.
Instructions for attaching and using the VersaTrack™ hang hook system.
