Craftsman CMXGBAM1054540 User Manual

CAUTION
Before using this equipment, read the manual and follow all safety rules and operating instructions.
CRAFTSMAN® is a registered trademark of Stanley Black & Decker, Inc., used under license.
CRAFTSMAN® es una marca registrada de Stanley Black & Decker, Inc., utilizada bajo licencia.
© 2018 CRAFTSMAN U.S. & Canada Only
CRAFTSMAN.com
Form No. 769-15931
(June 6, 2018)
INSTRUCTION MANUAL | MANUAL DE INSTRUCTIONES
SNOW BLOWER
Model Nos. CMXGBAM1054538
CMXGBAM1054539
CMXGBAM1054540
CMGB21179
IF YOU HAVE QUESTIONS OR COMMENTS, CONTACT US.
SI TIENE DUDAS O COMENTARIOS, CONTÁCTENOS.
1-888-331-4569 WWW.CRAFTSMAN.COM
NOTE: This Operator’s Manual covers several models. Features may vary by model. Not all features in this manual are applicable to all models and the model depicted may differ
from yours. The terms “snow thrower” and “snow blower” may be used interchangeably for this product.

Craftsman CMXGBAM1054540 Specifications

General

Engine Type	4-cycle
Engine Power/Displacement	208 cc
Clearing Width	21 inches
Intake Height	12 inches
Drive System	Self-propelled
Speed Settings	6 forward, 2 reverse
Auger Material	Steel
Chute Control	Manual
Type	Single stage

Summary

SAFETY INSTRUCTIONS

OPERATOR TRAINING

Read and follow all instructions before attempting to operate.

GASOLINE SAFETY

Handle gasoline with extreme care; it is flammable and vapors are explosive.

GENERAL OPERATION SAFETY

Follow all safety rules and operating instructions for safe use.

SAFETY GUIDELINES

CLOGGED CHUTE CLEARANCE

Use a tool, not hands, to clear a clogged discharge chute.

ENGINE SAFETY AND EMISSIONS

Warnings on engine modification, emissions, and spark arrestor.

ASSEMBLY

ADDING FUEL

SET-UP AND FUEL RECOMMENDATIONS

Important information on fuel types and recommendations for setup.

CHECKING & ADDING OIL

OPERATION

CONTROL PANEL OVERVIEW

AUGER AND CHUTE ASSEMBLY

STARTING AND STOPPING THE ENGINE

Procedures for starting with electric starter and stopping the engine.

STARTING THE ENGINE

Step-by-step guide for starting the engine using the recoil starter.

OPERATIONAL CONTROLS

OPERATING THE SNOW BLOWER

SERVICE AND MAINTENANCE

MAINTENANCE SCHEDULE

REPLACING AUGER PADDLES

CHANGING ENGINE OIL

OFF-SEASON STORAGE

AUGER DRIVE BELT REPLACEMENT

TROUBLESHOOTING

COMMON PROBLEMS AND REMEDIES

Guide to diagnose and fix common issues with the snow blower.