Craftsman CMXGVAMKC29C User Manual

769-17370 / 00 08/18
4-CYCLE
ELECTRIC START CAPABLE
GAS CULTIVATOR
MODEL NO. CMXGVAMKC29C
OPERATOR’S MANUAL
• SAFETY
• ASSEMBLY
• OPERATION
• MAINTENANCE
• ESPAÑOL, P. 21
CRAFTSMAN
®
IS A REGISTERED TRADEMARK OF STANLEY BLACK & DECKER, INC., USED UNDER LICENSE.
VISIT OUR WEBSITE: WWW.CRAFTSMAN.COM
WARNING: BEFORE USING THIS PRODUCT, READ THIS
MANUAL AND FOLLOW ALL ITS SAFETY RULES AND
OPERATING INSTRUCTIONS. SAVE THESE INSTRUCTIONS.

Craftsman CMXGVAMKC29C Specifications

General

Engine Type	4-Cycle
Engine Brand	Briggs & Stratton
Engine Power	163 cc
Cutting Width	29 inches
Drive Type	Self-Propelled
Number of Cutting Positions	6
Mulch Capable	Yes
Side Discharge	Yes
Rear Bag	Yes
Speed Settings	Variable
Mulching Capability	Yes
Bagging Capability	Yes
Side Discharge Capability	Yes
Start Type	Pull Cord
Fuel Tank Capacity	0.25 gal
Rear Wheel Size	11 inches
Front Wheel Size	8 inches

Summary

SAFETY OVERVIEW

SPARK ARRESTOR NOTE

Safety notice regarding spark arrestor requirements in specific regions.

CALIFORNIA EMISSIONS WARNING

Warning about potential carcinogens and reproductive toxins in engine exhaust.

IMPORTANT SAFETY INSTRUCTIONS

GAS UNIT SAFETY WARNINGS

Crucial safety precautions specific to gasoline-powered units.

OPERATING SAFETY GUIDELINES

Essential safety measures to follow while operating the cultivator.

ADDITIONAL SAFETY WARNINGS

GENERAL UNIT SAFETY

Safety advice for unit care, maintenance, and general handling.

TRANSPORT AND STORAGE SAFETY

Guidelines for safe transportation and long-term storage of the unit.

SAFETY SYMBOLS AND MEANINGS

OPERATOR'S MANUAL REFERENCE

Symbol indicating the necessity of reading the operator's manual.

PERSONAL PROTECTIVE EQUIPMENT

Symbols related to mandatory safety gear like eye, foot, and hand protection.

KNOW YOUR UNIT

CULTIVATOR APPLICATIONS

Describes the intended uses and soil types for the cultivator.

UNIT SPECIFICATIONS

Technical details and measurements of the gas cultivator.

ASSEMBLY INSTRUCTIONS

WHEEL ASSEMBLY INSTALLATION

Step-by-step guide for attaching and setting the wheel assembly.

HANDLEBAR POSITIONING

Instructions for correctly adjusting and securing the handlebar.

OIL AND FUEL MANAGEMENT

CORRECT OIL USAGE

Specifies the correct type and quality of oil for the engine.

INITIAL OIL ADDITION

Procedure for adding oil to the crankcase before first use.

FUEL SELECTION AND HANDLING

PROPER FUEL USAGE

Guidance on selecting appropriate gasoline and fuel additives.

SAFE FUELING PROCEDURES

Safe procedures for filling the fuel tank, including warnings.

STARTING AND STOPPING THE CULTIVATOR

STARTING PROCEDURES

Step-by-step guide for safely starting the cultivator engine, including cold weather.

STOPPING PROCEDURES

Procedure for safely shutting down the cultivator engine.

ELECTRIC START ACCESSORY OPERATION

ACCESSORY STARTING STEPS

Instructions for starting the unit using the optional electric start accessory.

ACCESSORY STOPPING STEPS

Procedure for stopping the unit when using the electric start accessory.

OPERATING THE CULTIVATOR

OPERATING TIPS AND TECHNIQUES

Advice and best practices for effective cultivator operation.

ADJUSTING CULTIVATOR DEPTH

How to modify tine penetration depth for different soil conditions.

MOVING THE CULTIVATOR

Safe procedures for relocating the cultivator.

UNIT MAINTENANCE

MAINTENANCE SCHEDULE

Recommended maintenance tasks and their frequencies for the unit.

TINE REPLACEMENT PROCEDURE

Step-by-step guide for safely removing and installing cultivator tines.

ENGINE FLUID MAINTENANCE

CHECKING ENGINE OIL LEVEL

How to verify the engine oil level before operation.

CHANGING ENGINE OIL

Procedure for draining and refilling the engine oil.

AIR FILTER AND IDLE SPEED

AIR FILTER MAINTENANCE

Instructions for cleaning and re-oiling the air filter.

ADJUSTING ENGINE IDLE SPEED

How to set the engine's idle speed for optimal performance.

SPARK PLUG AND STORAGE

SPARK PLUG MAINTENANCE

Steps for inspecting, cleaning, and replacing the spark plug.

CLEANING AND STORAGE GUIDELINES

Procedures for cleaning the unit and preparing it for storage.

TROUBLESHOOTING GUIDE

ENGINE STARTING PROBLEMS

Common causes and solutions when the engine fails to start.

ENGINE IDLING PROBLEMS

Troubleshooting steps for an engine that idles improperly.

ENGINE ACCELERATION ISSUES

Solutions for issues preventing the engine from accelerating.

ENGINE POWER AND STALLING

Reasons and fixes for the engine losing power or stopping unexpectedly.

PRODUCT WARRANTY INFORMATION

WARRANTY COVERAGE SCOPE

Defines the extent and limitations of the product warranty.

WARRANTY QUALIFICATION REQUIREMENTS

Requirements the owner must meet to be eligible for warranty service.

WARRANTY EXCLUSIONS

List of conditions and parts not covered by the limited warranty.

WARRANTY LIMITATIONS AND DISCLAIMERS

WARRANTY LIABILITY DISCLAIMERS

MTD LLC's disclaimers regarding implied warranties and liability.

WARRANTY LEGAL LIMITATIONS

Legal limitations on warranty claims and remedies.