EasyManua.ls Logo

Craftsman CMXGMAM1125504 - User Manual

Craftsman CMXGMAM1125504
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
WARNING!
Before using this equipment, read the manual and follow all safety rules and operating instructions. SAVE THESE INSTRUCTIONS.
Form No. 769-19555A
(December 11, 2018)
INSTRUCTION MANUAL | MANUAL DE INSTRUCTIONES
FRONT WHEEL DRIVE MOWER
Model Nos. CMXGMAM1125501
CMXGMAM2703841
CMXGMAM1125502
CMXGMAM1125503
CMXGMAM1125504
CMXGMAM2703842
CMXGMAM7435274
IF YOU HAVE QUESTIONS OR COMMENTS, CONTACT US.
SI TIENE DUDAS O COMENTARIOS, CONTÁCTENOS.
1-888-331-4569 WWW.CRAFTSMAN.COM
NOTE: This Operator’s Manual covers several models. Features may vary by model. Not all features in this manual are applicable to all models and the model depicted may differ
from yours.
TABLE OF CONTENTS
Safety Instructions ............................................... Pages 2-5
Slope Guide ..........................................................Page 6
Unpacking ...........................................................Page 7
Assembly .........................................................Pages 7-9
Adjustments ........................................................Page 10
Operation .......................................................Pages 11-14
Service and Maintenance ........................................Pages 15-17
Off-Season Storage ..................................................Page 18
Troubleshooting ................................................. Page 19-20
Español ...........................................................Page 21

Questions and Answers

  • R
    Roger BurnsAug 15, 2025
    Why won't my Craftsman CMXGMAM1125504 start?
    • J
      Jeffery HerreraAug 15, 2025
      Several factors could prevent your Craftsman Lawn Mower from starting. Ensure the blade control is engaged and the spark plug boot is connected. Check if the fuel tank is empty or contains stale fuel; if so, refill with fresh gasoline. If your mower has a primer, prime the engine as instructed. Inspect the spark plug for faults and clean, adjust the gap, or replace if necessary. If the engine is flooded, wait a few minutes before restarting. Finally, a blocked fuel line could be the issue, in which case you should contact your Parts & Repair Center to have it cleaned.
  • M
    Mr. Jason OneillAug 18, 2025
    What to do if Craftsman Lawn Mower with electric starter fails to start?
    • L
      lauraharrellAug 18, 2025
      If your Craftsman electric start lawn mower isn't starting, make sure the Electric Starter Push Key is fully inserted until it snaps into place. Also, ensure the battery is charged by referring to the Battery Charger Instructional Manual. Finally, if the circuit breaker tripped, stop the engine, remove the Electric Starter Push Key, and disconnect the spark plug boot. Check for and carefully remove any grass or debris obstructing the blade. Reattach the spark plug boot and reinsert the Electric Starter Push Key. Wait one minute for the circuit breaker to automatically reset before trying to start again.
  • V
    vbooneAug 21, 2025
    Why is my Craftsman CMXGMAM1125504 engine running erratically?
    • L
      lwoodAug 21, 2025
      An erratic running engine in your Craftsman Lawn Mower can stem from several causes. First, check that the spark plug boot is securely connected and tightened. Stale fuel can also cause this issue, so replace it with fresh gasoline. Ensure the vent in the gas cap isn't plugged. Water or dirt in the fuel system might be the culprit; run the engine until it stops from lack of fuel, then refill with fresh fuel. If the air cleaner is dirty, refer to the Engine Manual for Air Cleaner Maintenance instructions. Lastly, a blocked fuel line could be the problem, requiring professional cleaning.
  • H
    hartmankarenAug 25, 2025
    Why won't my Craftsman Lawn Mower self propel?
    • S
      Sierra HorneAug 25, 2025
      If your Craftsman Lawn Mower isn't self-propelling, check the belt for proper pulley installation and movement. Clear any debris clogging the drive operation by stopping the engine and disconnecting the spark plug boot before cleaning. Inspect the belt for damage or wear, and consider having it replaced. Also, the drive control might be out of adjustment, refer to page 10 in the Assembly & Set-up section for adjustment instructions.
  • H
    helenashleyAug 27, 2025
    Why does my Craftsman CMXGMAM1125504 Lawn Mower leave an uneven cut?
    • A
      alyssa92Aug 28, 2025
      An uneven cut with your Craftsman Lawn Mower can be caused by a few things. Make sure the wheels are positioned correctly by adjusting the cutting height lever on the right front and right rear wheels to the same position. Also, a dull blade can contribute to an uneven cut, so sharpen or replace it.
  • T
    taylorangelaAug 30, 2025
    What to do if my Craftsman CMXGMAM1125504 Lawn Mower engine overheats?
    • D
      Dale TaylorAug 30, 2025
      If your Craftsman Lawn Mower engine is overheating, start by checking the engine oil level and fill the crankcase with the proper oil if it's low. Also, ensure that there are no restrictions to air flow around the engine by cleaning the area around and on top of it.
  • J
    Joseph TurnerSep 2, 2025
    How to reduce excessive vibration in my Craftsman CMXGMAM1125504 Lawn Mower?
    • J
      jose31Sep 2, 2025
      Excessive vibration in your Craftsman Lawn Mower could be due to a loose or unbalanced cutting blade. Try tightening the blade and adapter, and balance the blade. If the cutting blade is bent, it will need to be replaced.
  • J
    Jesse StevensSep 5, 2025
    Why isn't my Craftsman Lawn Mower mulching grass properly?
    • B
      Brittany MillerSep 5, 2025
      If your Craftsman Lawn Mower isn't mulching grass effectively, it could be due to wet grass; avoid mowing in wet conditions and wait for the grass to dry. Excessively high grass can also hinder mulching, so mow once at a high cutting height, then mow again at the desired height or make a narrower cutting path. Finally, a dull blade will impact mulching performance, so sharpen or replace it.
  • J
    Joseph ThompsonSep 8, 2025
    Why does my Craftsman CMXGMAM1125504 idle poorly?
    • B
      bevansSep 8, 2025
      Poor idling in your Craftsman Lawn Mower can be attributed to a spark plug that is fouled, faulty, or has a gap that is too wide; reset the gap or replace the spark plug. Another potential cause is a dirty air cleaner, in which case you should refer to the Engine Manual for Air Cleaner Maintenance.
  • G
    Gregory MaldonadoSep 12, 2025
    What causes occasional skips in my Craftsman CMXGMAM1125504?
    • C
      Cory WalkerSep 12, 2025
      Occasional skipping or hesitation in your Craftsman Lawn Mower could be due to a spark plug gap that is too close. Adjust the gap, referring to the Spark Plug Maintenance section in the Engine Manual.

Summary

Safety Instructions

Slope Operation

Provides guidance on operating the mower safely on slopes to prevent slips and falls.

Children

Details safety precautions regarding children's interaction with the mower and operation.

Assembly

Operation

Blade Control

Explains how to use the blade control to start and stop the engine and blade.

Gas and Oil Fill-Up

Provides critical safety warnings and instructions for fueling the mower with gasoline and oil.

To Start Engine

Step-by-step instructions and safety warnings for starting the mower engine.

Using Your Lawn Mower

General guidance and safety precautions for operating the lawn mower.

Service and Maintenance

Maintenance Schedule

A schedule outlining recommended maintenance tasks and intervals for the mower.

Blade Care

Procedures for inspecting, balancing, and servicing the mower blade for safe operation.

Troubleshooting

Engine Fails to Start

Lists potential causes and remedies for the engine failing to start.

Craftsman CMXGMAM1125504 Specifications

General IconGeneral
BrandCraftsman
ModelCMXGMAM1125504
CategoryLawn Mower
LanguageEnglish

Related product manuals