Craftsman S165 User Manual

769-20672 / 00 02/19
2-CYCLE GAS CHAINSAW
MOTOSIERRA DE GAS DE 2 TIEMPOS
OPERATOR’S MANUAL | MANUAL DEL OPERADOR
S165 | S185
CMXGSAMCN4216 | CMXGSAMCN4218
1-888-331-4569 WWW.CRAFTSMAN.COM
IF YOU HAVE QUESTIONS OR COMMENTS, CONTACT US.
SI TIENE DUDAS O COMENTARIOS, CONTÁCTENOS.
ORIGINAL INSTRUCTIONS | TRADUCCIÓN DE LAS INSTRUCCIONES ORIGINALES

Craftsman S165 Specifications

General

Bar Length	16 inches
Engine Displacement	42 cc
Type	Gas
Chain Pitch	3/8 in
Chain Gauge	0.050 inch

Summary

Safety

Spark Arrestor Note

Note on spark arrestor requirements for specific locations and engine use.

Chemical Exposure Warning

Warning about engine exhaust chemicals known to cause cancer and reproductive harm.

Important Safety Instructions

General Operating Safety

Read instructions, stay alert, use PPE, check for damage, clear work area.

Gas Unit Fuel Safety

Precautions for handling fuel, including storage, mixing, and fueling procedures.

Safe Operation Practices

Guidelines for safe operation, including protective gear, clear workspace, and proper handling.

Kickback Safety

Understanding Kickback Hazards

Explanation of rotational and linear kickback to help reduce injury.

Kickback Prevention Measures

Steps to reduce the chance of accident or injury related to kickback.

Additional Safety Warnings

Unit Maintenance & Storage Safety

Instructions for care, maintenance, cleaning, and safe storage of the unit.

General Operational Safety Reminders

Important reminders about unit operation, maintenance, and storage.

Safety and International Symbols

General Safety Symbols and Warnings

Explanation of safety alert, manual reading, PPE, fuel, and oil symbols.

Operational Symbols and Controls

Definitions and functions of controls like On/Off, Primer, Choke, and safety features like Chain Brake.

Know Your Unit

Unit Applications

Describes the intended uses of the chainsaw, such as felling, bucking, and pruning.

Assembly Tools Required

Lists the tools needed for assembling the chainsaw.

Essential Terms and Definitions

Chainsaw Components and Operations

Definitions of chainsaw parts, safety features, and operational processes like felling and bucking.

Specifications

Technical Specifications

Details engine type, displacement, spark plug, fuel/oil ratio, capacities, and dimensions.

Replacement Parts List

Part numbers and descriptions for common replacement parts like chains and guide bars.

Assembly

Initial Bar and Chain Oil Setup

Instructions for filling the chain oil reservoir before initial use.

Chain Brake Testing Procedure

Procedure to test the functionality of the chain brake before operation.

Oil and Fuel

Fuel and Oil Mixing Instructions

Guidelines for mixing gasoline and 2-cycle oil, including fuel type and ratios.

Safe Fueling Procedures

Steps and precautions for safely filling the fuel tank.

Starting and Stopping

Starting Procedures

Step-by-step instructions for starting the engine, including pre-start checks and choke usage.

Stopping and Emergency Stopping

How to properly stop the engine and procedures for emergency stopping.

Operation

Pre-Operation Checks

Ensures chain tension, oil level, and proper PPE are checked before operating the unit.

Tips for Best Results

Advice for efficient operation, including safety, cutting materials, and log size limits.

Work Area and Unit Handling

Preparing the Work Area

Clear the area of hazards, ensure secure footing, and maintain safe distances.

Proper Unit Handling and Stance

Correct hand placement and stance for stable control and to minimize kickback risk.

Felling Trees Safely

Felling Safety Precautions

Safety measures to reduce risks during tree felling, including lean, obstacles, and escape routes.

Felling Procedure Steps

Steps for felling, including removing buttress roots and making the notched undercut.

Felling and Limbing Procedures

Making the Felling Back Cut

Procedure for the final cut to fell a tree, including hinge control and wedge use.

Limbing Fallen Tree Limbs

Steps for removing branches from a fallen tree, managing support limbs and tension.

Bucking Logs Safely

Bucking Safety Precautions

Safety measures to reduce injury risk when cutting fallen trees into logs.

Bucking Procedures

Methods for cutting logs under stress and fully-supported logs.

Cutting Techniques

Overbucking and Underbucking

Techniques for cutting logs based on their support, to prevent pinching.

Pruning Living Tree Limbs

Steps for safely pruning limbs from a living tree, avoiding shoulder height cuts.

Maintenance Overview

Customer Maintenance Responsibilities

Tasks the user is responsible for, categorized by frequency (before use, every 10 hours, after use).

Maintenance Schedule

Recommended frequency for performing required maintenance procedures.

Bar and Chain Lubrication

Adding Bar and Chain Oil

Instructions for filling the chain oil reservoir and precautions for preventing damage.

Adjusting Oil Flow Rate

How to increase or decrease the automatic oiler flow using the adjustment screw.

Chain Tension Adjustment

Proper Chain Tensioning Guide

How to adjust chain tension for optimal performance and to prevent wear, including break-in adjustments.

Guide Bar and Chain Servicing

Guide Bar and Chain Removal/Installation

Step-by-step instructions for removing and installing the guide bar and saw chain.

Saw Chain Maintenance

How to maintain the saw chain for safe and efficient operation, including signs of dullness.

Saw Chain Sharpening

Chain Sharpening Procedure

Detailed steps for filing cutters and adjusting depth gauges for optimal sharpness and safety.

Guide Bar Maintenance

Guide Bar Care and Cleaning

Procedures for cleaning the guide bar groove, oil passages, and checking for damage.

Lubricating the Sprocket Tip

Instructions for lubricating the guide bar sprocket tip to prevent damage and maintain performance.

Component Replacement and Air Filter

Replacing Guide Bar and Saw Chain

Using correct parts and low-kickback chains for safe replacement.

Air Filter Maintenance

How to clean the air filter for optimal engine performance and to prevent damage.

Engine Adjustments and Spark Plug

Idle Speed Adjustment

Procedure to adjust idle speed for smooth engine operation and to prevent chain spin.

Spark Plug Maintenance

Steps for inspecting, cleaning, and setting the air gap of the spark plug.

Cleaning and Storage Procedures

Cleaning the Unit After Use

How to clean the unit after use, including cylinder fins and general exterior.

Storing the Unit Safely

Guidelines for storing the unit, including short-term and long-term procedures.

Troubleshooting Guide

Engine Starting and Running Issues

Solutions for engine not starting, not idling, or lacking power.

Chain and Saw Operation Problems

Troubleshooting for chain coming off, running hot, not rotating, or not cutting.

Product Warranty Information

Limited Warranty Terms and Scope

Explains the limited warranty for Craftsman branded handheld products, including scope and coverage.

Warranty Exclusions and Service

Lists what the warranty does not cover and how to obtain service.

Warranty Limitations and Disclaimers

Excluded Responsibilities

MTD LLC disclaims responsibility for loss of use, transportation costs, and damage to other equipment.

Warranty Limitations and State Law

Discusses implied warranties, exclusive remedies, and limitations on damages.