Craig CHT914c - Speaker System Installation; Assembly Method 1; Assembly Method 2

1
2
3
INSTALLATION
3
4
1
2
3
Method 1: Assemble the main unit and L Speaker together :
Left Speaker
Supplied
Wooden Stand
Supplied Metallic
Screws and Washers
Method 2: Assemble Main Unit and L Speaker individually :
Main unit
Left Speaker
Supplied
Wooden Stand
Supplied Metallic
Screws and Washers
Lock the Hook on the rear of left
speaker to the Main unit as Fig.
4
This unit can be assembled as the following methods: This unit can be assembled as the following methods:
Main Unit
Left Speaker
Decorative Inserts
Note: We supplied total two Wooden Stands and 4 sets Metallic Screws/Washers.Keep the
excess accessories in this assembly method for future use.