CRAIN 673 - User Manual

NO. 673 13" WOOD CUTTER
SAFETY FIRST:
The Crain 13" Wood Cutter is designed to cut wood and laminate ooring
planks only. It is not designed for cutting shingles or wall siding. Do not use
this cutter for any purpose not described in this manual. Read and save all
instructions.
This cutter has a sharp blade. Keep hands away! The blade is lever-activated
and can cause severe cuts or sever ngers or hands. Pay attention to the
position and motion of the blade in operation and transportation of the cutter.
If the material being cut gets stuck on the blade, remove the stuck material
from the blade using scrap material or other tool. Do not use bare hands!
Keep hands away from the blade at all times. Use of new, clean, sharp blades
can reduce the sticking of materials on the blade.
Scrap materials, dust, and splinters can accumulate around the blade, behind
the blade, or on the bed of the cutter. These can impair the safe operation of
the cutter. Keep these clear at all times by dusting them off using a piece of
scrap material or other tool. Keep hands away from the blade.
The cutting operation may leave splinters or sharp edges on the material that
INSTRUCTIONS FOR
Carrying
Handle
Ruler
Cut Guide
Fence
Bottom
Bar
Guide
Post
Blade
Pressure
Roller
Blade
Carrier
Safety
Lock
Connector
Tube
Pressure
Roller
Leverage
Handle
Grip
Bed
Rear
Stand

T
h
i
n
k
S
a
f
e
t
y

W
e
a
r
E
y
e
P
r
o
t
e
c
t
i
o
n
CRAIN
KEEP HANDS
AWAY FROM:
WARNING!
BLADE
BLADE CARRIER
PRESSURE ROLLERS
Figure 1

Summary

Safety First

General Warnings and Blade Safety

Covers sharp blade hazards, keeping hands away, and pressure roller pinch points.

Safety Lock and Leverage Handle Operation

Details on engaging the safety lock and safe handling of the spring-loaded leverage handle.

Work Area, User, and Bystander Safety

Guidelines for a clean workspace, user qualifications, and keeping children/bystanders clear.

Material Handling and Health Precautions

Advice on excessive force, tool weight, dust hazards, and health recommendations.

Operation

Materials and Preparation for Cutting

Specifies compatible materials and procedures for preparing the cutter before use.

Leverage Handle Assembly and Safety Lock

Instructions for assembling the leverage handle and disengaging the safety lock.

Making Cuts and Edge Finishing

Details on performing cuts, ensuring clean edges, and using the integrated ruler.

Fence and Cut Guide Adjustment

Guidance on adjusting the fence for different cut angles and using the cut guide.

Transportation and Storage

Maintenance

Blade Sharpening and Burr Removal

Procedure for maintaining the blade's sharpness using the included sharpening stone.

Changing the Blade

Step-by-step instructions for safely removing and installing a new blade.

Cutting Dust Chemical Hazards

Warning about chemical hazards in cutting dust and recommended protective measures.

Replacement Parts

Guarantee

CRAIN 673 Specifications

General

Brand	CRAIN
Model	673
Category	Cutter
Language	English