Need help?Do you have a question about the CRAIN 820/820V and is the answer not in the manual?
Always wear safety glasses and a dust mask when using the saw.
The blade guard is for safety; do not operate if damaged.
Keep work area clean, dry, and well-lit; avoid damp floors.
Use sharp blades to avoid kickback and heavy load.
Introduces Figure 1, a diagram of the saw parts.
Power| voltage | 120 VAC, 60 Hz |
|---|---|
| amperes | 8.15 Amps |
| wattage | 930 Watts |
Cutting Specifications| max depth of cut | 1' |
|---|---|
| max height of cut | 1u |
| minimum height | 31lzu |
Weight and Dimensions| gross weight | 14 lbs |
|---|
Power| voltage | 220 VAC, 50 Hz |
|---|---|
| amperes | 4.1 Amps |
| wattage | 930 Watts |
Cutting Specifications| max depth of cut | 1' |
|---|---|
| max height of cut | 1u |
| minimum height | 31lzu |
Weight and Dimensions| gross weight | 14 lbs |
|---|
To Next Page
