To Next PageTo Next PageWhy does the line keep breaking on my Cramer Pole Saw?
If the line on your Cramer Pole Saw keeps breaking, it's likely due to incorrect usage. To resolve this, cut with the tip of the line, avoiding contact with stones, walls, and other hard objects. Also, advance the cutting line regularly to maintain a full cutting width.
What to do if the line does not advance on my Cramer 2101786?
If the line on your Cramer Pole Saw isn't advancing, there are several possible causes. The lines might be welded together; if so, lubricate them with silicone spray. Alternatively, there may not be enough line on the spool, in which case you should install more line. If the lines are worn too short, try advancing the cutting line. Finally, the lines might be tangled on the spool. If this is the case, remove the lines from the spool and rewind them.
General| Brand | Cramer |
|---|---|
| Model | 2101786 |
| Category | Pole Saw |
| Power Source | Battery |
| Voltage | 82V |
| Motor Type | Brushless |
| Telescopic Shaft | Yes |
| Material | Aluminum |
| Blade Length | 25 cm |
