Cramer 2101786 - English; Table of Contents

1 Description.........................................4
1.1 Purpose.............................................................. 4
1.2 Overview........................................................... 4
1.3 Packing list........................................................ 4
2 Safety.................................................. 4
3 Installation......................................... 4
3.1 Unpack the machine.......................................... 4
3.2 Attach the guard.................................................4
3.3 Assemble the shaft.............................................5
3.4 Attach the auxiliary handle................................5
3.5 Install the battery pack.......................................5
3.6 Remove the battery pack................................... 5
4 Operation........................................... 5
4.1 Start the machine............................................... 5
4.2 Stop the machine............................................... 5
4.3 Adjust the length of the cutting line.................. 5
4.4 Line cut-off blade.............................................. 5
4.5 Adjust the cutting diameter................................5
4.6 Cutting tips........................................................ 6
4.7 Operation tips.................................................... 6
4.8 Use the shoulder strap........................................6
5 Maintenance.......................................6
5.1 General information...........................................6
5.2 Clean the machine............................................. 6
5.3 Install the cutting line........................................ 6
5.4 Replace the spool...............................................6
5.5 Replace the bump knob..................................... 7
5.6 Remove the trimmer head..................................7
5.7 Assemble the trimmer head...............................7
5.8 Remove the brush-cutter blade..........................7
5.9 Assemble the brush cutter blade........................7
6 Transportation and storage..............7
6.1 Move the machine............................................. 7
6.2 Store the machine.............................................. 7
7 Troubleshooting.................................8
8 Technical data....................................8
9 EC Declaration of conformity..........9
3
English
EN