EasyManua.ls Logo

Cramer RM2000 - Technical Data

Cramer RM2000
582 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CRAMERTOOLS.COM
26
EN
Technical Data
Optimow 10 Optimow 15 Optimow 20
Dimensions:
Height 26 cm 26 cm 26 cm
Length 62 cm 62 cm 62 cm
Width 50 cm 50 cm 50 cm
Weight 11 kg 11 kg 11 kg
Electrical system:
Battery, Special Lithium-Ion battery 24 V / 2.0 Ah, Part No. 211022355 24 V / 2.0 Ah, Part No. 211022355 24 V / 2.0 Ah, Part No. 211022355
Power supply 100-240 V/32 V DC 100-240 V/32 V DC 100-240 V/32 V DC
Low voltage cable length 10 m 10 m 10 m
Mean energy consumption at
maximum use
8 kWh/month for a working area
of 1,000 m
2
10 kWh/month for a working
area of 1,500 m
2
12 kWh/month for a working
area of 2,000 m
2
Charge current 1.3 A DC 1.3 A DC 2.4 A DC
Average charging time 140 minutes 70 minutes 40 minutes
Average cutting time 70 minutes 70 minutes 70 minutes
Noise emissions: *)
Measured sound power noise level **) 58 dB (A) 58 dB (A) 58 dB (A)
Guaranteed sound power noise level 60 dB (A) 60 dB (A) 60 dB (A)
Sound pressure noise level ***) 47 dB (A) 47 dB (A) 47 dB (A)
Mowing:
Cutting system Three pivoted cutting blades Three pivoted cutting blades Three pivoted cutting blades
Average power consumption during
cutting
25 W ± 20% 25 W ± 20% 25 W ± 20%
Cutting height 2-6 cm 2-6 cm 2-6 cm
Cutting width 22 cm 22 cm 22 cm
Narrowest possible passage 60 cm 60 cm 60 cm
Maximum angle for cutting area 35% 35% 35%
Maximum angle for boundary wire 15% 15% 15%
Maximum length boundary wire 800 m 800 m 800 m
Maximum working capacity 1,000 m
2
1,500 m
2
2,000 m
2
Recommended area capacity 0 - 700 m
2
500 - 1,200 m
2
1000 - 1,700 m
2
IP classification:
Mower IPX5 IPX5 IPX5
Charging station IPX2 IPX2 IPX2
Power supply IP67 IP67 IP67
*) Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/14/EC. The guaranteed sound power
level includes variation in production as well as variation from the test code with 1-3 dB(A).
The noise emission declarations conforms to EN 50636-2-107:2015
**) uncertainties KWA, 2 dB (A)
***) uncertainties KPA, 2-4 dB (A)

Table of Contents

Related product manuals