Page 16 of 29
*”Lighting Control” - LIGHTING CONSERVATION CONTROL ROUTINE (Config 2 Must Be Enabled –
Config 2 1)
This function is used to turn the lights off and on during certain periods of the day. Press key number 4 will
enter “Enable #”.
“Enable #” - Lighting Conservation Control Enable Routine
This function is used to disable Lighting Conservation Control “Enable 0” (lights will be on at all times) or enable
Lighting Conservation Control “Enable 1” (lights can be set to turn off). Press key number 4 and the current “Enable
#” setting will be displayed. Press key number 2 or 3 to scroll between “Enable 0” and “Enable 1”. Press key number
4 with the display showing the setting you wish to use. Press key number 2 to scroll to “Start Time”.
“Start Time” - Start Lighting Conservation Setting (lights off)
This function is used to set the days and time to start light conservation when “Enable 1” is selected. Press key
number 4 and “Start Day” will show on the display.
“Start Day” - Day to Start Setting
This function is used to set the days of the week to start light conservation. Press key number 4 and “XXXXXX#”
will show on the display, where XXXXXX will be the day of the week (i.e. Monday, Tuesday, Wednesday,
Thursday, Friday, Saturday, Sunday, Every day) and # is 0 = disable, 1 = enable. With the display showing the day
you wish to set press key number 4. The # will start blinking. Press key number 2 or 3 to scroll between
“XXXXXX0” and “XXXXXX1”. Press key number 4 with the display showing the setting you wish to use. Display
will return to “XXXXXX#”. Press key number 2 to scroll to the next day to set or press key number 1 to return to
“Start Day”. Press key number 2 to scroll to “Start Hour”.
“Start Hour” - Start Hour and Minute Setting
This function is used to set the hours to start light conservation (lamps off). Press key number 4 and “hhmm”
will show on the display, where “hh” is the hour (military time) and “mm” is the minute. “hh” will be blinking,
indicating the hour setting may be changed. Press key number 2 to scroll from 00 to 23. With the display showing
the hour you wish to start light conservation, press key number 4. “mm” will start blinking, indicating the minute
setting may be changed. Press key number 2 to scroll from 00 to 59. With the display showing the minute you
wish to start light conservation, press key number 4. The display will return to “Start Hour”. Press key number 1
to return to “Start Time”. Press key number 2 to scroll to “Stop Time”.
“Stop Time” - Stop Light Conservation Setting (lights on)
This function is used to set the days and time to stop light conservation. Press key number 4 and “Stop Day” will
show on the display.
“Stop Day” - Day to Stop Setting
This function is used to set the days of the week to stop light conservation and can be set in the same manner
as Day to Start Setting.
“Stop Hour” - Stop Hour and Minute Setting
This function is used to set the hours and minutes to stop light conservation and can be set in the same manner
as Start Hour and Minute Setting. Press key number 1 to return to “Stop Time”. Press key number 1 to return to
“Lighting Control”. Press key number 2 to scroll to next routine.
*”Refrigeration” - REFRIGERATION ROUTINE
This function is used to electronically control the refrigeration operations of the vender. Press key number 4 will enter
“Enable #”.
“Enable #” - Energy Conservation Enable Routine
This function is used to disable Energy Conservation “Enable 0” or enable Energy Conservation “Enable 1”. When
enabled the cabinet temperature will be allowed to rise to the programmed storage level (“Storage”) during the
following programmed time blocks. Press key number 4 and the current “Enable X” setting will be displayed. Press
key number 2 or 3 to scroll between “Enable 0” and “Enable 1”. Press key number 4 with the display showing the
setting you wish to use. Press key number 2 to scroll to “Start”.
To Next Page
Loading...
