Crane 787E User Manual

Emiel Becquaertlaan 2 B2/51a
2400 Mol
België
0493 11 46 83
www.shopautomatics.com
automatics
p
2
€
sh
handleiding
Crane 787E

Crane 787E Specifications

General

Brand	Crane
Model	787E
Category	Merchandiser
Language	English

Summary

Electrical Power Requirements

Voltage Check

Procedure to verify the correct voltage at the wall receptacle using a voltmeter.

Polarity Check

Procedure to confirm proper electrical polarity of the wall receptacle.

Noise Potential Check

Machine Controls and Indicators

Service Keypad

Machine Controls and Indicators (continued)

Main Controller PCB Display

How to Turn the Merchandiser ON and OFF

Initial Machine Setup

Move the Merchandiser Through a Narrow Doorway

Steps to facilitate moving the machine through tight spaces by removing panels.

Move the Merchandiser Through a Narrow Doorway (continued)

Snack Module Setup

Place A Tray In The Loading Position

Tray Setup for Vending

Tray Vertical Adjustment

Loading Trays with Product

Loading Trays with Product (continued)

Spiral Wall Retainer Usage Guide

Product Pusher Usage Guide

Tray Loading Procedures

"Lunch Bucket" Product Loading

"Top Shelf" Product Loading

Tray Return to Vending Position

Price Label Installation

Price Label Installation (continued)

Price Roll Adjustment

Process for setting individual product prices using the price rolls.

Selection ID Label Installation

Selection ID Label Installation (continued)

Selection ID Label Placement Guide

Information on matching ID labels to tray and motor positions.

Gum and Mint Unit Setup

Price Label Installation for Gum/Mint

Attaching price labels next to column ID numbers on the gum/mint unit.

Gum/Mint Dispenser Loading Prep

Loading Gum/Mint Dispenser

Final Machine Installation

Merchandiser Leveling Procedure

Procedure for ensuring the machine is stable and level.

Refrigeration Module Setup

External Drain Connection (Optional)

Instructions for connecting the refrigeration module to an external drain.

Air Vent Adjustment for Chillers

How to optimize airflow and temperature for chilled units.

Coin Mechanism Setup

Setting the Quarter Switch

Configuration of the coin mechanism's high quarter switch.

Machine Programming

Service Keypad Overview

Setting Product Prices

Procedure for assigning prices to product selections.

Checking Unit Temperature

Final Machine Checkout

Testing Product Vending Selections

Performing test sales to ensure proper product dispensing.

Operational Readiness Checks

Spiral Indexing (Single Spiral/Motor)

Spiral Indexing (Dual Spiral/Motor)

Bill Validator Testing