To Next PageTo Next Page
Need help?Do you have a question about the Crane BEVMAX 6 and is the answer not in the manual?
General| Manufacturer | Crane Merchandising Systems |
|---|---|
| Model | BEVMAX 6 |
| Voltage | 115 VAC |
| Display | LED |
| Type | Beverage Merchandiser |
| Dimensions (H x W x D) | 72" x 39" x 32" |
| Power | 115V |
| Payment Options | Coin |
Controls machine logic and communicates with peripherals via MDB.
Handles vending steps and advises the Atlas Control Board.
Keypad on the service door for programming and customer selections.
Displays instructions for customers and programmers above the keypad.
Overview of programming modes, PIN access, and keypad/touchscreen interaction.
Allows customers to view product details, cost, and nutritional data before purchase.
View sales data that is not reset by DEX reads or clearing functions.
View sales data that can be reset to zero, including clear data option.
View recorded data for power losses and door events history.
List of errors, time, date, probable causes, and solutions.
Perform test vends to verify selection operation and credit acceptance.
View return air temperature and refrigeration state data.
Test the cashless system by swiping a card.
View data about coin mechanism and bill validator.
Set prices for selections tray by tray.
Set prices for specific product selections on a chosen tray.
Configure active selections for each tray.
Set up First-In, First-Out (FIFO) groups for product rotation.
Enter or clear Universal Product Codes (UPC) or EAN codes.
Toggle Free Vend mode ON or OFF for specific selections.
Configure winner mode for random product giveaways.
Set up promotional combo offers with discounts.
Manage coin dispensing, view counts, and set up channels.
Select Bill Validator mode (MDB or No Bill Validator).
Configure parameters for change dispensing, including declining balance and force vend.
Set Machine ID and Location.
Set machine time, date, time zones, and time format.
Update machine software using a USB flash drive.
Create, save, and restore machine configuration settings.
Enter the operator PIN to access service mode.
Change the 4-digit Operator PIN for full access.
Change the 4-digit Engineer PIN for factory use only.
Create events based on time of day, like price adjustments or free vends.
Schedule timed backup events for machine data.
Assign the unit to the Telemetry Service Mode menu.
View network status, including node type, AID, and adaptor type.
Load network configuration file from a USB stick.
Control temperature set points and health control features.
View firmware version for various peripherals in the machine.
