BevMax_Media_Programming_10_6_10 Page 49 of 106
08/15/2013
3. Stack Bills – Press the 3 Key to bring up a screen.
Press the 3 Key, will bring up a screen to allow you to check the option to Stack the Bill immediately or
wait (hold the bill in escrow) until a selection is made. Use a numeric Key to check the setting you wish
to set the vender. Use the center section of the OK Key to accept the setting.
Press the X Key to return to the Home screen.
8. SYSTEM SETTINGS………….Press the 8 Key to bring up a screen.
Press the 8 Key will bring up a screen that will allow you access to the functions in this group.
Use the numeric Keys to choose a function.
Choosing a function will bring up the first screen for that
function or toggle choices.
Use the top and bottom sections of the OK Key to scroll
to the second screen.
The last entry on the first screen is repeated on the
second screen.
Current settings are listed on the right side of the line.
1. Machine Information – Press the 1 Key to bring up a screen.
Press the 1 Key will bring up a screen allowing you to select to set the Machine ID or set the Machine
Location.
Press the 1 Key to set the Machine ID number. Use a numeric
Key to choose a number to be entered in place of BevMaxG.
Once the number has been entered, use the center section of the
OK Key to accept the entry.
Press the 2 Key to set the Machine Location. It will allow you
to enter a custom message using the numeric keypad.
1. Press on the Keypad to cycle between alpha and numeric characters.
I. The Keypad will default to lowercase alpha.
II. Press once to go to uppercase alpha.
III. Press
once to go to numeric characters.
Stack Bills
1) Wait √
2) Stack immediately
System Settings
1. Machine Information >
2. Time And Date >
3. Language >
4. DTS (data transfer system) >
5. Software Updates >
6. Back-up / Restore >
7. Clone (copy) Configuration >
8. Screen Brightness >
9. LED Color Blue
Second Screen
1. LED Color (repeated) Blue
2. Idle Time Out 30s
3. Advertisements >
4. Custom Messages >
5. Nightly Reboot Settings >
6. Talker Settings >
Machine Information
1) Machine ID
BevMaxG
2) Machine Location
Location Not Set
To Next Page
Loading...
