Crane BEVMAX 6 - Backup Events

BevMax_Media_Programming_10_6_10 Page 69 of 106
08/15/2013
2. Press the 2 Key will bring up the first screen for Back-Up Events.
Press the 2 key will bring up a screen allowing you to set up a timed
back-up of events.
Press the 1 Key to SAVE your settings or your work will be
lost.
Press the 2 Key to toggle the setting for the state of the event between ON and OFF.
Press the 3 Key to open a window allowing you to use the numeric keypad to
enter a time of day for the event to begin.
Press the 4 Key to bring up a screen allowing you to choose the days of the week
when the event will be active. The checked days are active.
A. Use the top and bottom of the OK Key to scroll thru the screens.
B. Use the 1 Key to check all the days of the week at once.
C. Use the 2 Key to un-check all the days of the week at once.
D. You do not need to save the choices here, just return to
the set up menu for the event and proceed.
REMEMBER TO SAVE YOUR SETTINGS OR YOUR WORK WILL BE
LOST!
3. Press the 3 Key will bring up the first screen for Power Saving events.
Press the 3 Key will bring up a screen allowing you to set up timed
power saving events.
Press the 1 Key here will create an event and begin a list of saved
events that can be set up as needed.
Use the numeric Keys to choose a created event to set up for use and another screen will come up
allowing you to configure the event to fit your needs.
Press the 1 Key to SAVE your settings or your work
will be lost.
Press the 2 Key to REMOVE the event from
memory.
Press the 3 Key to toggle the setting for the state of
the event between ON and OFF.
Press the 4 Key to toggle the setting for the frequency of the event between DAILY and WEEKLY.
Timed Events
1) Time of Day Events >
2) Backup Events >
3) Power Saving Events >
Backup Events
1) Save this event >
2) Enable state On Off
3) Start time 00:00
4) Days of week >
Days of week
1) Set All
2) Clear All
3) Monday
4) Tuesday
5) Wednesday
6) Thursday
7) Friday
8) Saturday
Second Screen
1) Saturday (repeat)
2) Sunday
Timed Events
1) Time of Day Events >
2) Backup Events >
3) Power Saving Events >
Power Save Events
1) Create Event >
2) Power Save #1 >
3) Power Save #2 >
Power Save Events
1) Save This Event >
2) Remove This Event >
3) Enable State On Off
4) Frequency Weekly Daily
5) Start Time 00:00
6) Stop Time 00:00
7) Days Of Week >