Crane 787E - Coin Mechanism Setup; Setting the Quarter Switch

Snack / Refreshment Center Setup and Operator's Guide
Page 431670001 April, 1999
If the changer is not a MARS TRC 6000, proceed to LOADING THE COIN MECHANISM.
If the changer is a MARS TRC 6000, you must set the high quarter switch.
SETTING THE QUARTER SWITCH:
ON
1
2 34
HIGH QUARTER
SWITCH
1. Open the cabinet door.
2. Open the monetary door.
3. Insert coins one at a time until each of the coin tubes has been filled.
4. Inspect the tubes for shingled coins and correct if necessary.
QUARTER SWITCH
POSITION
ACTION
LOW
The coin mechanism
will only store 6
quarters. The rest are
sent to the coin box.
Fewer quarters are
available for change.
HIGH
The coin mechanism
will store 69 quarters.
More quarters are
available for change.
SB&&L$-&/0&-4$&6"*,&5$241,*.+
UB&& K"18& -4$& 6"*,&5$241,*.+