Crane Coca-Cola BevMAX Refresh - Page 27

Page 27 of 29
Please see table below for programming options effected by MASTER RESET. NOTE: A power out error message
will be generated when a master reset is performed. The table outlines the results of using MASTER RESET.
ITEM
RESET TO
Tube Fill
Cleared
Cash Counters each select
$0.00
Sales Counters each select
0
Price Program
99.95
StS Programming
Option 1
Config 1
0 (single price)
Config 2
0 (disabled or off)
Config 3
0 (enabled or on)
Config 4
0 (disabled or off)
Config 5
0 (disabled or off)
Config 6
Not used
Config 7
0 (disabled or off)
Config 8
0 (disabled or off)
Config 9
0 (disabled or off)
Config 10
0 (escrow bill)
Correct Change
0 (disabled or off)
Preview Password
Reset to 4231
Language
English
Tim Programming
0 (disabled or off)
Lighting Control
0 (disabled or off)
Refrigeration
Set point 35°F
Select Block 1
0 (disabled or off)
Select Block 2
0 (disabled or off)
Select Discount
0 (disabled or off)
Health Safety
0 (disabled or off)
Over-ride Switch
0 (disabled or off)
Remote Vend Mech
0 (disabled or off)
Combo Vend Discount
0 (disabled or off)
Coke Factory Setup
Update Software – Allows for software loading to individual motor controllers as needed:
Contact the Factory Technician for instructions on how this feature is used.
Coke Factory Setup
Double Talk – Turns Double Talk feature On & Off
The function is used to turn on or turn off the “Double Talk” feature. Press the number “4” key and “Double Talk”
will show on display. Press the “4” Key and display will show current state “On” or “Off”. Press “2” to toggle from
On to Off. With the display showing the state you wish the mode to be in, press the “4” key. Press key 1 to return
“Double Talk”.