To Next PageTo Next PageWhat to do if my Crane EE-0865, EE-3186, EE-3189, EE-3190, EE-3191, EE-4139, EE-4140, EE-5058, EE-6369, EE-7270, EE-8189, EE-8190, EE-8243 Humidifier is leaking?
If your humidifier is leaking from the mist lid, turn the control knob down. If the leak is from the tank, check for cracks in the tank or around the seam. If the leak is from the base, contact Customer Care.
Why is the indicator light staying red on my Crane Humidifier?
If the indicator light is staying red, make sure the cap is secured properly to the tank, allowing water to pass through to the base. Also, clean the water level sensor by pulling off the plastic cap from the peg, removing the water level sensor float, and cleaning it with warm, sudsy water. Replace the parts by putting the float onto the peg first, then replacing the plastic cap on the peg.
What to do if my Crane Humidifier power light is green, but there is no mist?
If the power light is green but your Crane Humidifier isn't emitting mist, first ensure there's water in the tank. Then, check that nothing is blocking the mist output slots or the fan vent on the bottom of the humidifier. You may also need to empty the humidifier, rinse the water basin with cool tap water, and let it dry for 15 to 30 minutes before using it again. Finally, inspect the water level sensor or the nebulizer for mineral deposits.
What to do if my Crane EE-0865, EE-3186, EE-3189, EE-3190, EE-3191, EE-4139, EE-4140, EE-5058, EE-6369, EE-7270, EE-8189, EE-8190, EE-8243 has no mist?
If the power indicator light is green but no mist is being emitted, ensure there is water in the water tank. Also, check that nothing is blocking the mist lid and that the fan vent on the bottom of the humidifier is not blocked. Empty and rinse the water basin with cool tap water. Finally, check for possible mineral deposits on the water level sensor and nebulizer.
What to do if my Crane EE-0865, EE-3186, EE-3189, EE-3190, EE-3191, EE-4139, EE-4140, EE-5058, EE-6369, EE-7270, EE-8189, EE-8190, EE-8243 has no power?
If your humidifier does not have any power, first ensure that the unit is properly plugged into a power outlet. Next, check that the control knob is turned to the ON position. If the power indicator light still does not come on, contact Crane Customer Care.
How to fix a Crane EE-0865, EE-3186, EE-3189, EE-3190, EE-3191, EE-4139, EE-4140, EE-5058, EE-6369, EE-7270, EE-8189, EE-8190, EE-8243 red light?
If the humidifier power indicator light is staying red and not turning green, ensure that the water tank cap is secured properly to the water tank. Empty out water in the water basin and place the filled water tank onto the empty water basin. Clean the water level sensor by unscrewing or snapping off the plastic cap from the pin, removing the water level sensor float, and wiping the parts with a soft, damp cloth. Replace the parts by first putting the water float onto the pin and replacing the plastic cap on the pin.
How to get rid of a strange odor from my Crane EE-0865, EE-3186, EE-3189, EE-3190, EE-3191, EE-4139, EE-4140, EE-5058, EE-6369, EE-7270, EE-8189, EE-8190, EE-8243?
To eliminate a strange odor from your humidifier, clean the water tank with a water and white vinegar solution, then rinse with clean water. You can also leave the empty water tank open in a cool place for 12 hours without the water tank cap attached.
How to get rid of strange odor from Crane EE-0865, EE-3186, EE-3189, EE-3190, EE-3191, EE-4139, EE-4140, EE-5058, EE-6369, EE-7270, EE-8189, EE-8190, EE-8243 Humidifier?
If you notice a strange odor coming from your Crane Humidifier, clean the water tank with a solution of water and vinegar, then rinse it with clean water. You can also leave the empty water tank open in a cool place for a while, without the water tank cap attached.
What to do if my Crane EE-0865, EE-3186, EE-3189, EE-3190, EE-3191, EE-4139, EE-4140, EE-5058, EE-6369, EE-7270, EE-8189, EE-8190, EE-8243 Humidifier indicator light is green but there's no mist?
If the indicator light is green but there's no mist, first complete the weekly maintenance. Also, the base might be overfilled, so remove the tank, empty the base, and replace the filled tank on the empty base. Ensure the humidifier is on a hard, flat surface and the fan vent isn't blocked. You can also try turning the control knob up to MAX and letting it run for 10 minutes.
How to fix Crane EE-0865, EE-3186, EE-3189, EE-3190, EE-3191, EE-4139, EE-4140, EE-5058, EE-6369, EE-7270, EE-8189, EE-8190, EE-8243 Humidifier with no power?
First, ensure your unit is properly plugged into a working power outlet. Check that the control knob is turned to the ON position. If the power indicator light still doesn't come on, contact Customer Care.
General| Brand | Crane |
|---|---|
| Model | EE-0865, EE-3186, EE-3189, EE-3190, EE-3191, EE-4139, EE-4140, EE-5058, EE-6369, EE-7270, EE-8189, EE-8190, EE-8243 |
| Category | Humidifier |
| Language | English |
