Main modes
51
8. To confirm your selection, push the “MODE” button.
“ABOVE Alarm” blinks on the display.
9. To configure whether an alarm should sound when you
exceed the upper pulse limit, push the “ST./STP.” button or
the “SELECT” button.
10. To confirm your selection, push the “MODE” button.
As soon as at least one of the alarms is activated,
will
appear in the middle of the display.
“TARGET STEP” blinks on the display.
11. To determine how many steps you would like to set as
your workout goal, push the “ST./STP.” button (forward) or
“SELECT” button (back).
To Next Page
Loading...
