EasyManua.ls Logo

CRAWLER ANKA300 - Water System Management; Clean Water Inlet Operation; Dirty Water Outlet Operation

CRAWLER ANKA300
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CRAWLER
Model: ANKA 300
Version: EN 1.00.0922
Clean Water Inlet
- To fill the clean water tank (80 L), open the clean water inlet by
turning it counter clockwise with the help of a key.
- Empty the clean water tank from the clean water inlet to the clean
water tank inside.
- Lock the lid after filling.
Dirty Water Outlet
There are two dirty water outlets in the kitchen area (1) and the
bathroom (2) separately.
For the dirty water outlet of the kitchen area;
-The dirty water tank (17 L) is emptied with the help of the valve
(1) located in the left rear cabinet outside of ANKA300.
For the dirty water outlet of the bathroom area;
- Bathroom drains are emptied directly from the lower left side of
the caravan.
- When the booster level approaches the critical level, in order to
restart the booster, the drain valve of the dirty water tank should
be opened and the tank should be emptied in an appropriate
place. - Attention is paid to the water booster warnings on the
Crawler Smart Panel or control panel.